Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD60E60 / EI6054mm leaf

FD60 Fire Doorsets in Greater London

We supply and fit FD60 fire doors throughout Greater London, including London, Brent and Islington, as complete certified doorsets with a free survey and a fixed, itemised quote.

From £1,050 per single doorset in Greater London, supplied & fitted, ex VAT

Oak-veneered fire doorset pair with vision panel beside a concrete stair

FD60 fire doors in Greater London: how we work

Throughout Greater London, including London, Brent and Islington, we survey, quote and fit FD60 doorsets for compartment walls, cores and plant rooms as complete certified doorsets, with the manufacturer's certificate reference on every quote.

Which rules apply in Greater London?

In Greater London, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.

What do FD60 fire doors cost in Greater London?

Our guide price for FD60 fire doors in Greater London is £1,050 to £1,650 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.

Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.

Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.

Buildings that need FD60 fire doors

London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.

  • Compartment walls
  • Stair cores in taller blocks
  • Plant and boiler rooms
  • Higher-risk stores

What's in the doorset

Fire resistance60 minutes integrity (FD60 / E60); EI60 where specified
Typical leaf54mm timber or steel
Smoke controlFD60S available with tested smoke seals
Typical useCompartment walls, firefighting shafts, plant rooms
HingesUsually four hinges on timber leaves, per test evidence
Elevation drawing of fd60 fire doorsets

See the full specification and options for FD60 Fire Doorsets

What happens next

  1. Share your FRA or inspection findings
  2. We confirm every door on site
  3. Fixed quote, certified doorsets only
  4. Fitted to the manufacturer's instructions, with photos

Your questions answered

Is the survey free?

Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.

Do you cover the whole of Greater London?

Yes. We survey, supply and fit FD60 fire doors across Greater London, including London, Brent and Islington.

Do you remove the old doors?

Yes. Removal and disposal of the old door and frame is included when we replace a doorset.

Can I use an FD60 door where FD30 is required?

Yes — a higher rating meets a lower requirement — but it is heavier and dearer, so we only recommend it where the location calls for it or you want a margin.

Towns in Greater London we cover for FD60 fire doors

FD60 Fire Doorsets in neighbouring areas

Other fire doors in Greater London

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.