Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD60E60 / EI6054mm leaf

FD60 Fire Doorsets in Eltham

We supply and fit FD60 fire doors in Eltham (SE9) as complete certified doorsets — surveyed free, quoted door by door with each manufacturer's certificate reference, and fitted to the manufacturer's instructions.

From £1,050 per single doorset in Eltham, supplied & fitted, ex VAT

Oak-veneered fire doorset pair with vision panel beside a concrete stair

Our Eltham supply and fit service

We cover Eltham and nearby Blackheath for FD60 fire doors, with surveys booked around your building's access and occupancy. Each door is quoted individually, so you can see what every opening costs and why.

Eltham is about 9 miles from London; we cover both, along with Blackheath, Welling and Catford.

Which rules apply in Eltham?

In Eltham, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.

Cost of FD60 fire doors in Greater London

Guide prices for FD60 fire doors in Eltham run from about £1,050 to £1,650 per single doorset, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.

Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.

Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.

Where FD60 fire doors are needed

Typical uses for FD60 fire doors in Eltham include higher-risk stores and compartment walls.

London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.

  • Higher-risk stores
  • Compartment walls
  • Plant and boiler rooms
  • Stair cores in taller blocks

What you get with each doorset

Fire resistance60 minutes integrity (FD60 / E60); EI60 where specified
Typical leaf54mm timber or steel
Smoke controlFD60S available with tested smoke seals
Typical useCompartment walls, firefighting shafts, plant rooms
HingesUsually four hinges on timber leaves, per test evidence
Elevation drawing of fd60 fire doorsets

See the full specification and options for FD60 Fire Doorsets

From enquiry to handover

  1. Send your postcode, door count and any fire risk assessment notes
  2. We survey and measure each opening for free
  3. You get a fixed, itemised quote with certificate references
  4. We fit, test operation and hand over the paperwork

Questions about FD60 fire doors in Eltham

Can you work around tenants or staff in Eltham?

Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.

What does a Eltham quote include?

Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.

Can you fit just one door in Eltham?

Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Greater London.

Can I use an FD60 door where FD30 is required?

Yes — a higher rating meets a lower requirement — but it is heavier and dearer, so we only recommend it where the location calls for it or you want a margin.

Neighbouring areas

Other fire doors in Eltham

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.