Getting FD60 fire doors fitted in Mitcham
Need FD60 fire doors in Mitcham? We supply and fit complete certified doorsets across Greater London, starting with a free measure survey in and around CR4. Every quote lists each door, its rating and the manufacturer's certificate reference, so you know exactly what is going in before anything is ordered.
Mitcham is about 7 miles from London; we cover both, along with Morden, Wimbledon and Streatham.
Fire door rules in Mitcham
Because Mitcham is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
What do FD60 fire doors cost in Mitcham?
Our guide price for FD60 fire doors in Mitcham is £1,050 to £1,650 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Where FD60 fire doors are used in Mitcham
In Mitcham, FD60 fire doors are typically needed in compartment walls and higher-risk stores.
London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.
- Compartment walls
- Higher-risk stores
- Plant and boiler rooms
- Stair cores in taller blocks
Doorset specification
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
What happens next
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Your questions answered
How quickly can you survey in Mitcham?
We arrange surveys around your access needs and, where possible, combine Mitcham visits with other work in Greater London. Tell us your preferred dates when you enquire.
Can you work around tenants or staff in Mitcham?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Can you fit just one door in Mitcham?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Greater London.
How thick is an FD60 door?
Typically 54mm for timber doorsets. Steel FD60 doors vary by manufacturer.
Neighbouring areas
- Morden (1 mile)
- Wimbledon (2 miles)
- Streatham (2 miles)
- Carshalton (2 miles)
- Wallington (2 miles)
- Croydon (3 miles)
Also available in Mitcham
- FD90 & FD120 Doorsets in Mitcham
- HMO Fire Doors in Mitcham
- Timber Fire Doorsets in Mitcham
- Flat Entrance Fire Doors in Mitcham
- Communal & Corridor Fire Doors in Mitcham
- Double & Leaf-and-a-Half Fire Doors in Mitcham
- School & Healthcare Fire Doors in Mitcham
- Composite Fire Doors in Mitcham
- FD60 Fire Doorsets across Greater London
- All fire doors in Mitcham