Getting FD60 fire doors fitted in Barnet
Getting FD60 fire doors right in Barnet means choosing a certified doorset for each opening and fitting it exactly as tested. That's the whole service: survey, schedule, certified doorset, careful installation and the paperwork to prove it.
Our Greater London coverage includes Barnet and its neighbours Hadley Wood, Potters Bar and Borehamwood; tell us your postcode and preferred dates and we'll confirm a survey slot.
Regulations for FD60 fire doors in Greater London
Because Barnet is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
Cost of FD60 fire doors in Greater London
Our guide price for FD60 fire doors in Barnet is £1,050 to £1,650 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.
The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.
Where FD60 fire doors are needed
Compartment walls and plant and boiler rooms are among the most common settings for FD60 fire doors, in Barnet as elsewhere.
London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.
- Compartment walls
- Plant and boiler rooms
- Stair cores in taller blocks
- Higher-risk stores
Doorset specification
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
What happens next
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Your questions answered
How quickly can you survey in Barnet?
We arrange surveys around your access needs and, where possible, combine Barnet visits with other work in Greater London. Tell us your preferred dates when you enquire.
What does a Barnet quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Can you work around tenants or staff in Barnet?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Do FD60 doors need different closers?
Often a stronger closer, sized to the heavier leaf, still keeping opening forces within Approved Document M limits where accessibility applies.
FD60 Fire Doorsets near Barnet
- Hadley Wood (2 miles)
- Potters Bar (3 miles)
- Borehamwood (3 miles)
- Finchley (3 miles)
- Muswell Hill (5 miles)
- Enfield (5 miles)
Other products in Barnet
- FD90 & FD120 Doorsets in Barnet
- Flat Entrance Fire Doors in Barnet
- FD30S Smoke Control Doorsets in Barnet
- Acoustic Fire Doors in Barnet
- School & Healthcare Fire Doors in Barnet
- Fire Doors for Homes in Barnet
- HMO Fire Doors in Barnet
- Fire Door Ironmongery & Closers in Barnet
- FD60 Fire Doorsets across Greater London
- All fire doors in Barnet