Getting FD60 fire doors fitted in Wimbledon
We fit FD60 doorsets for compartment walls, cores and plant rooms in Wimbledon and the rest of Greater London. The process is simple: we survey and measure each opening, propose a certified doorset for it, and give you a fixed price. Fitting is booked once the doorsets are made, usually with no door left out of action overnight.
Whether your building is in central Wimbledon or on its edges towards Morden, survey and fitting dates are arranged around your access needs, with occupied buildings worked in planned phases.
Which rules apply in Wimbledon?
Fire doors in Wimbledon sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
What do FD60 fire doors cost in Wimbledon?
Our guide price for FD60 fire doors in Wimbledon is £1,050 to £1,650 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.
Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.
Buildings that need FD60 fire doors
Wherever they are in Wimbledon, FD60 fire doors are most often specified for stair cores in taller blocks and plant and boiler rooms.
London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.
- Stair cores in taller blocks
- Plant and boiler rooms
- Compartment walls
- Higher-risk stores
What's in the doorset
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
How it works in Wimbledon
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Your questions answered
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Wimbledon.
Can you work around tenants or staff in Wimbledon?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Do you work for landlords and managing agents in Wimbledon?
Yes. We can schedule doors flat by flat, send quotes per property and invoice the managing agent or freeholder.
How thick is an FD60 door?
Typically 54mm for timber doorsets. Steel FD60 doors vary by manufacturer.
FD60 Fire Doorsets near Wimbledon
- Morden (2 miles)
- Mitcham (2 miles)
- Putney (2 miles)
- New Malden (2 miles)
- Streatham (3 miles)
- Barnes (4 miles)
More doorsets for Wimbledon
- Fire Exit Doors in Wimbledon
- FD30 Fire Doorsets in Wimbledon
- Glazed Fire Doors in Wimbledon
- FD90 & FD120 Doorsets in Wimbledon
- Timber Fire Doorsets in Wimbledon
- Composite Fire Doors in Wimbledon
- Commercial & Office Fire Doors in Wimbledon
- Steel Fire Doors in Wimbledon
- FD60 Fire Doorsets across Greater London
- All fire doors in Wimbledon