Certified FD60 fire doors for Hornchurch
We cover Hornchurch and nearby Romford for FD60 fire doors, with surveys booked around your building's access and occupancy. Each door is quoted individually, so you can see what every opening costs and why.
We cover RM12 and the surrounding area, including Romford. Tell us your postcode and preferred dates and we'll confirm a survey slot.
What the law says in Hornchurch
Because Hornchurch is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
FD60 fire doors prices in Hornchurch
Budget around £1,050 to £1,650 per single doorset for FD60 fire doors supplied and fitted in Hornchurch, excluding VAT. We price each opening separately so nothing is hidden in a lump sum.
Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Where FD60 fire doors are used in Hornchurch
Wherever they are in Hornchurch, FD60 fire doors are most often specified for plant and boiler rooms and higher-risk stores.
London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.
- Plant and boiler rooms
- Higher-risk stores
- Stair cores in taller blocks
- Compartment walls
What's in the doorset
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
From enquiry to handover
- Request a quote online or call
- Survey: sizes, ratings, hardware and condition
- Quote with each doorset's certification
- Phased fitting and handover records
Common questions in Greater London
Which rules do FD60 fire doors in Hornchurch need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
What does a Hornchurch quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Do you cover Hornchurch?
Yes. We survey, supply and fit FD60 fire doors throughout Hornchurch and the rest of Greater London, including RM12 and nearby Romford.
How thick is an FD60 door?
Typically 54mm for timber doorsets. Steel FD60 doors vary by manufacturer.
Also covering towns near Hornchurch
- Romford (2 miles)
- Dagenham (2 miles)
- Becontree (4 miles)
- South Ockendon (4 miles)
- Thamesmead (6 miles)
- Brentwood (6 miles)
Other fire doors in Hornchurch
- FD30 Fire Doorsets in Hornchurch
- Double & Leaf-and-a-Half Fire Doors in Hornchurch
- Commercial & Office Fire Doors in Hornchurch
- FD90 & FD120 Doorsets in Hornchurch
- Riser & Service Cupboard Doors in Hornchurch
- Acoustic Fire Doors in Hornchurch
- Security Fire Doors in Hornchurch
- Composite Fire Doors in Hornchurch
- FD60 Fire Doorsets across Greater London
- All fire doors in Hornchurch