Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD60E60 / EI6054mm leaf

FD60 Fire Doorsets in Hertfordshire

We supply and fit FD60 fire doors throughout Hertfordshire, including Watford, Hemel Hempstead and Stevenage, as complete certified doorsets with a free survey and a fixed, itemised quote.

From £1,050 per single doorset in Hertfordshire, supplied & fitted, ex VAT

Oak-veneered fire doorset pair with vision panel beside a concrete stair

Getting FD60 fire doors fitted in Hertfordshire

Our Hertfordshire service covers FD60 fire doors for flats, HMOs, workplaces, schools and homes, including Watford, Hemel Hempstead and Stevenage.

Which rules apply in Hertfordshire?

In Hertfordshire, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.

What do FD60 fire doors cost in Hertfordshire?

Expect roughly £1,050–£1,650 per single doorset for FD60 fire doors, fitted, ex VAT. Your Hertfordshire quote is fixed after survey and itemised door by door.

Guide prices assume straightforward access; out-of-hours working or difficult access is priced as a separate, visible line.

Typical uses in Hertfordshire

Hertfordshire's new towns — Stevenage, Hatfield, Welwyn Garden City — sit alongside commuter towns with office-to-residential conversions.

  • Compartment walls
  • Stair cores in taller blocks
  • Plant and boiler rooms
  • Higher-risk stores

FD60 Fire Doorsets: key specification

Fire resistance60 minutes integrity (FD60 / E60); EI60 where specified
Typical leaf54mm timber or steel
Smoke controlFD60S available with tested smoke seals
Typical useCompartment walls, firefighting shafts, plant rooms
HingesUsually four hinges on timber leaves, per test evidence
Elevation drawing of fd60 fire doorsets

See the full specification and options for FD60 Fire Doorsets

What happens next

  1. Share your FRA or inspection findings
  2. We confirm every door on site
  3. Fixed quote, certified doorsets only
  4. Fitted to the manufacturer's instructions, with photos

Questions about FD60 fire doors in Hertfordshire

Can you work around tenants or staff?

Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.

Do you cover the whole of Hertfordshire?

Yes. We survey, supply and fit FD60 fire doors across Hertfordshire, including Watford, Hemel Hempstead and Stevenage.

How quickly can you survey in Hertfordshire?

We arrange surveys around your access needs and, where possible, combine visits with other work in Hertfordshire. Tell us your preferred dates when you enquire.

Can I use an FD60 door where FD30 is required?

Yes — a higher rating meets a lower requirement — but it is heavier and dearer, so we only recommend it where the location calls for it or you want a margin.

Towns in Hertfordshire we cover for FD60 fire doors

FD60 Fire Doorsets in neighbouring areas

Other fire doors in Hertfordshire

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.