FD60 fire doors in New Malden | Supplied & Fitted

Getting FD60 fire doors fitted in New Malden

For landlords, managing agents, businesses and homeowners in New Malden, we provide FD60 doorsets for compartment walls, cores and plant rooms with one fixed quote. A free survey comes first, then a door-by-door schedule, then installation to the manufacturer's instructions and a handover pack for your records.

New Malden is about 9 miles from London; we cover both, along with Surbiton, Morden and Wimbledon.

What the law says in New Malden

New and replacement fire doors in New Malden are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.

What do FD60 fire doors cost in New Malden?

Guide prices for FD60 fire doors in New Malden run from about £1,050 to £1,650 per single doorset, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.

Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.

The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.

Where FD60 fire doors are needed

In New Malden, FD60 fire doors are typically needed in higher-risk stores and plant and boiler rooms.

London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.

Higher-risk stores
Plant and boiler rooms
Compartment walls
Stair cores in taller blocks

What you get with each doorset

Fire resistance	60 minutes integrity (FD60 / E60); EI60 where specified
Typical leaf	54mm timber or steel
Smoke control	FD60S available with tested smoke seals
Typical use	Compartment walls, firefighting shafts, plant rooms
Hinges	Usually four hinges on timber leaves, per test evidence

See the full specification and options for FD60 Fire Doorsets

How it works in New Malden

Send your postcode, door count and any fire risk assessment notes
We survey and measure each opening for free
You get a fixed, itemised quote with certificate references
We fit, test operation and hand over the paperwork

FD60 fire doors in New Malden: questions

What does a New Malden quote include?

Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.

How quickly can you survey in New Malden?

We arrange surveys around your access needs and, where possible, combine New Malden visits with other work in Greater London. Tell us your preferred dates when you enquire.

Is the survey in New Malden free?

Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.

Can I use an FD60 door where FD30 is required?

Yes — a higher rating meets a lower requirement — but it is heavier and dearer, so we only recommend it where the location calls for it or you want a margin.

FD60 Fire Doorsets in New Malden