Getting FD60 fire doors fitted in Ruislip
Fire Rated Doors supplies and fits FD60 fire doors in Ruislip, Greater London. Whether it's a single replacement or every door in a block, we start by surveying the openings and end with a handover pack listing each doorset and its certificate reference.
Ruislip is about 14 miles from London; we cover both, along with Northolt, Uxbridge and Harrow.
Fire door rules in Ruislip
In Ruislip, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.
FD60 fire doors prices in Ruislip
Our guide price for FD60 fire doors in Ruislip is £1,050 to £1,650 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.
If your fire risk assessment lists specific doors, send it with your enquiry and we'll price exactly those openings.
Where FD60 fire doors are needed
In Ruislip, FD60 fire doors are typically needed in higher-risk stores and stair cores in taller blocks.
London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.
- Higher-risk stores
- Stair cores in taller blocks
- Plant and boiler rooms
- Compartment walls
Doorset specification
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
What happens next
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Questions about FD60 fire doors in Ruislip
Do you cover Ruislip?
Yes. We survey, supply and fit FD60 fire doors throughout Ruislip and the rest of Greater London, including HA4 and nearby Northolt.
What does a Ruislip quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Ruislip.
Can I use an FD60 door where FD30 is required?
Yes — a higher rating meets a lower requirement — but it is heavier and dearer, so we only recommend it where the location calls for it or you want a margin.
Also covering towns near Ruislip
- Northolt (3 miles)
- Uxbridge (3 miles)
- Harrow (4 miles)
- Hayes (4 miles)
- Greenford (4 miles)
- Southall (5 miles)
More doorsets for Ruislip
- Fire Door Ironmongery & Closers in Ruislip
- Fire-Rated Screens & Fanlights in Ruislip
- Double & Leaf-and-a-Half Fire Doors in Ruislip
- Stairwell & Escape Route Doors in Ruislip
- HMO Fire Doors in Ruislip
- Glazed Fire Doors in Ruislip
- Communal & Corridor Fire Doors in Ruislip
- FD30 Fire Doorsets in Ruislip
- FD60 Fire Doorsets across Greater London
- All fire doors in Ruislip