Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD60E60 / EI6054mm leaf

FD60 Fire Doorsets in Chingford

We supply and fit FD60 fire doors in Chingford (E4) as complete certified doorsets — with a free measure survey, a fixed itemised quote listing every certificate reference, and installation exactly as tested.

From £1,050 per single doorset in Chingford, supplied & fitted, ex VAT

Oak-veneered fire doorset pair with vision panel beside a concrete stair

FD60 fire doors in Chingford: how we work

If your fire risk assessment in Chingford has flagged doors to replace, we can schedule, quote and fit FD60 doorsets for compartment walls, cores and plant rooms to match its recommendations. Surveys in E4 are free and quotes are fixed and itemised.

Chingford is about 10 miles from London. Wherever your building is in E4, we arrange survey and fitting dates around access and occupancy.

Which rules apply in Chingford?

Fire doors in Chingford sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.

What do FD60 fire doors cost in Chingford?

Expect roughly £1,050–£1,650 per single doorset for FD60 fire doors, fitted, ex VAT. Your Chingford quote is fixed after survey and itemised door by door.

Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.

Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.

Typical uses in Chingford

Wherever they are in Chingford, FD60 fire doors are most often specified for stair cores in taller blocks and plant and boiler rooms.

London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.

  • Stair cores in taller blocks
  • Plant and boiler rooms
  • Higher-risk stores
  • Compartment walls

FD60 Fire Doorsets: key specification

Fire resistance60 minutes integrity (FD60 / E60); EI60 where specified
Typical leaf54mm timber or steel
Smoke controlFD60S available with tested smoke seals
Typical useCompartment walls, firefighting shafts, plant rooms
HingesUsually four hinges on timber leaves, per test evidence
Elevation drawing of fd60 fire doorsets

See the full specification and options for FD60 Fire Doorsets

Four steps to compliant doors

  1. Share your FRA or inspection findings
  2. We confirm every door on site
  3. Fixed quote, certified doorsets only
  4. Fitted to the manufacturer's instructions, with photos

Your questions answered

Do you remove the old doors?

Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Chingford.

Which rules do FD60 fire doors in Chingford need to meet?

They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.

Is the survey in Chingford free?

Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.

Is there an FD60S?

Yes. FD60S doorsets have tested smoke seals as well as 60 minutes of fire resistance.

Neighbouring areas

Other fire doors in Chingford

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.