FD60 fire doors in Chelsea: how we work
We cover Chelsea and nearby Battersea for FD60 fire doors, with surveys booked around your building's access and occupancy. Each door is quoted individually, so you can see what every opening costs and why.
Chelsea is about 2 miles from London. Wherever your building is in SW3, we arrange survey and fitting dates around access and occupancy.
Which rules apply in Chelsea?
New and replacement fire doors in Chelsea are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
Guide prices in Chelsea
Expect roughly £1,050–£1,650 per single doorset for FD60 fire doors, fitted, ex VAT. Your Chelsea quote is fixed after survey and itemised door by door.
Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Buildings that need FD60 fire doors
In Chelsea, FD60 fire doors are typically needed in compartment walls and stair cores in taller blocks.
London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.
- Compartment walls
- Stair cores in taller blocks
- Higher-risk stores
- Plant and boiler rooms
FD60 Fire Doorsets: key specification
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
From enquiry to handover
- Request a quote online or call
- Survey: sizes, ratings, hardware and condition
- Quote with each doorset's certification
- Phased fitting and handover records
Questions about FD60 fire doors in Chelsea
Do you work for landlords and managing agents in Chelsea?
Yes. We can schedule doors flat by flat, send quotes per property and invoice the managing agent or freeholder.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Chelsea.
Will I get certificates for the doors fitted in Chelsea?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Can I use an FD60 door where FD30 is required?
Yes — a higher rating meets a lower requirement — but it is heavier and dearer, so we only recommend it where the location calls for it or you want a margin.
Neighbouring areas
- Battersea (1 mile)
- Fulham (1 mile)
- Pimlico (1 mile)
- Westminster (2 miles)
- Notting Hill (2 miles)
- London (2 miles)
Other products in Chelsea
- Fire Doors for Homes in Chelsea
- Stairwell & Escape Route Doors in Chelsea
- School & Healthcare Fire Doors in Chelsea
- Glazed Fire Doors in Chelsea
- Acoustic Fire Doors in Chelsea
- Riser & Service Cupboard Doors in Chelsea
- FD90 & FD120 Doorsets in Chelsea
- FD30S Smoke Control Doorsets in Chelsea
- FD60 Fire Doorsets across Greater London
- All fire doors in Chelsea