Our Brent supply and fit service
Getting FD60 fire doors right in Brent means choosing a certified doorset for each opening and fitting it exactly as tested. That's the whole service: survey, schedule, certified doorset, careful installation and the paperwork to prove it.
Whether your building is in central Brent or on its edges towards Wembley, survey and fitting dates are arranged around your access needs, with occupied buildings worked in planned phases.
What the law says in Brent
Fire doors in Brent sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
What do FD60 fire doors cost in Brent?
Guide prices for FD60 fire doors in Brent run from about £1,050 to £1,650 per single doorset, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.
The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.
Typical uses in Brent
In Brent, FD60 fire doors are typically needed in plant and boiler rooms and compartment walls.
London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.
- Plant and boiler rooms
- Compartment walls
- Stair cores in taller blocks
- Higher-risk stores
What's in the doorset
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
Four steps to compliant doors
- Tell us about the doors — photos help
- Free measure survey at your Brent property
- Door-by-door schedule and fixed price
- Installation and handover pack
FD60 fire doors in Brent: questions
Is the survey in Brent free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
How quickly can you survey in Brent?
We arrange surveys around your access needs and, where possible, combine Brent visits with other work in Greater London. Tell us your preferred dates when you enquire.
Do you cover Brent?
Yes. We survey, supply and fit FD60 fire doors throughout Brent and the rest of Greater London, including HA0 and nearby Wembley.
Do FD60 doors need different closers?
Often a stronger closer, sized to the heavier leaf, still keeping opening forces within Approved Document M limits where accessibility applies.
Also covering towns near Brent
- Wembley (under a mile)
- Harrow (2 miles)
- Greenford (3 miles)
- Northolt (3 miles)
- Acton (3 miles)
- Willesden (3 miles)
More doorsets for Brent
- Communal & Corridor Fire Doors in Brent
- Flat Entrance Fire Doors in Brent
- FD90 & FD120 Doorsets in Brent
- Fire Door Supply & Fit in Brent
- Timber Fire Doorsets in Brent
- HMO Fire Doors in Brent
- Fire Exit Doors in Brent
- Composite Fire Doors in Brent
- FD60 Fire Doorsets across Greater London
- All fire doors in Brent