Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD60E60 / EI6054mm leaf

FD60 Fire Doorsets in Blackheath

We supply and fit FD60 fire doors in Blackheath (SE3) as complete certified doorsets — surveyed free, quoted door by door with each manufacturer's certificate reference, and fitted to the manufacturer's instructions.

From £1,050 per single doorset in Blackheath, supplied & fitted, ex VAT

Oak-veneered fire doorset pair with vision panel beside a concrete stair

Certified FD60 fire doors for Blackheath

We cover Blackheath and nearby Greenwich for FD60 fire doors, with surveys booked around your building's access and occupancy. Each door is quoted individually, so you can see what every opening costs and why.

Whether your building is in central Blackheath or on its edges towards Greenwich, survey and fitting dates are arranged around your access needs, with occupied buildings worked in planned phases.

What the law says in Blackheath

Because Blackheath is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.

FD60 fire doors prices in Blackheath

Our guide price for FD60 fire doors in Blackheath is £1,050 to £1,650 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.

Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.

Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.

Where FD60 fire doors are needed

In Blackheath, FD60 fire doors are typically needed in higher-risk stores and stair cores in taller blocks.

London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.

  • Higher-risk stores
  • Stair cores in taller blocks
  • Compartment walls
  • Plant and boiler rooms

FD60 Fire Doorsets: key specification

Fire resistance60 minutes integrity (FD60 / E60); EI60 where specified
Typical leaf54mm timber or steel
Smoke controlFD60S available with tested smoke seals
Typical useCompartment walls, firefighting shafts, plant rooms
HingesUsually four hinges on timber leaves, per test evidence
Elevation drawing of fd60 fire doorsets

See the full specification and options for FD60 Fire Doorsets

How it works in Blackheath

  1. Tell us about the doors — photos help
  2. Free measure survey at your Blackheath property
  3. Door-by-door schedule and fixed price
  4. Installation and handover pack

Questions about FD60 fire doors in Blackheath

Can you work around tenants or staff in Blackheath?

Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.

Which rules do FD60 fire doors in Blackheath need to meet?

They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.

Is the survey in Blackheath free?

Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.

Can I use an FD60 door where FD30 is required?

Yes — a higher rating meets a lower requirement — but it is heavier and dearer, so we only recommend it where the location calls for it or you want a margin.

FD60 Fire Doorsets near Blackheath

Other fire doors in Blackheath

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.