FD60 fire doors in Hampton: how we work
We fit FD60 doorsets for compartment walls, cores and plant rooms in Hampton and the rest of Greater London. The process is simple: we survey and measure each opening, propose a certified doorset for it, and give you a fixed price. Fitting is booked once the doorsets are made, usually with no door left out of action overnight.
Whether your building is in central Hampton or on its edges towards Hanworth, survey and fitting dates are arranged around your access needs, with occupied buildings worked in planned phases.
Which rules apply in Hampton?
In Hampton, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.
What do FD60 fire doors cost in Hampton?
Expect roughly £1,050–£1,650 per single doorset for FD60 fire doors, fitted, ex VAT. Your Hampton quote is fixed after survey and itemised door by door.
Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Where FD60 fire doors are needed
Higher-risk stores and compartment walls are among the most common settings for FD60 fire doors, in Hampton as elsewhere.
London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.
- Higher-risk stores
- Compartment walls
- Stair cores in taller blocks
- Plant and boiler rooms
Doorset specification
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
From enquiry to handover
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Common questions in Greater London
What does a Hampton quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Which rules do FD60 fire doors in Hampton need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Hampton.
Can I use an FD60 door where FD30 is required?
Yes — a higher rating meets a lower requirement — but it is heavier and dearer, so we only recommend it where the location calls for it or you want a margin.
FD60 Fire Doorsets near Hampton
- Hanworth (1 mile)
- Sunbury-on-Thames (2 miles)
- Walton-on-Thames (2 miles)
- Esher (3 miles)
- Feltham (3 miles)
- Surbiton (3 miles)
Also available in Hampton
- HMO Fire Doors in Hampton
- Fire Door Replacement in Hampton
- Riser & Service Cupboard Doors in Hampton
- FD30S Smoke Control Doorsets in Hampton
- Fire-Rated Screens & Fanlights in Hampton
- Stairwell & Escape Route Doors in Hampton
- Glazed Fire Doors in Hampton
- Communal & Corridor Fire Doors in Hampton
- FD60 Fire Doorsets across Greater London
- All fire doors in Hampton