Fire Door Replacement at a glance
| Starts from | Your fire risk assessment, inspection report or our survey |
|---|---|
| Scope | Remove old door and frame, fit new certified doorset, make good |
| Disposal | Old doors removed and disposed of |
| Programme | Phased around occupied buildings |
| Handover | Certificate references, installation record and photos |
| Guide price | From £750 per FD30 doorset including removal, ex VAT |
Repair or replace?
Doors with known certification and minor faults — a failed closer, worn seals, loose hinges — can usually be repaired with approved parts. Doors with no identifiable certification, large gaps, damaged leaves or non-fire glass are usually better replaced: no amount of repair creates test evidence that doesn't exist.
How a replacement project runs
- We review your fire risk assessment or inspection findings, or survey the doors ourselves.
- Each door gets a schedule line: rating, size, hardware and the proposed certified doorset.
- You receive a fixed, itemised quote with certificate references.
- Doors are manufactured and fitted in planned phases, with the building secure and escape routes maintained.
- You receive a handover pack for your fire safety records.
Working with your inspector
If your doors were inspected by a third party, we work straight from their report. Our sister site firedoor-inspections.uk covers inspections and surveys; this site covers supplying and fitting the doorsets themselves.
Where are fire door replacement used?
- Doors failed at inspection
- Doors with no evidence of rating
- Regulation 10 remedial work
- Refurbishment programmes
Fire door replacement questions
How do I know if my fire door needs replacing?
Large or uneven gaps, missing or painted-over seals, a closer that doesn't latch the door, damage to the leaf or frame, ordinary glass, or no label or plug showing certification are all warning signs.
Can you replace just the door leaf?
Only if the existing frame is covered by the new leaf's evidence, which is uncommon. A complete doorset is usually needed.
How long does replacement take?
A single doorset usually takes a few hours to fit once manufactured. We'll give you the full programme on your quote.
What happens to the old doors?
We remove and dispose of them as part of the job.
Related doorsets
Fire Door Supply & Fit
Survey, certified doorset, installation and handover — one fixed quote.
View doorsets
FD30 Fire Doorsets
30-minute certified doorsets — the workhorse of flats, offices and HMOs.
View doorsets
Flat Entrance Fire Doors
FD30S front doors for flats — fire, smoke and security in one certified set.
View doorsets
Fire Door Ironmongery & Closers
Closers, hinges, hold-open devices, seals and signs — tested for the door.
View doorsetsFire Door Replacement near you
We supply and fit fire door replacement across the UK. Choose your area for local guide prices and the rules that apply there.
- Bedfordshire
- Berkshire
- Bristol
- Buckinghamshire
- Cambridgeshire
- Cheshire
- Cornwall
- Cumbria
- Derbyshire
- Devon
- Dorset
- County Durham
- East Riding of Yorkshire
- East Sussex
- Essex
- Gloucestershire
- Greater London
- Greater Manchester
- Hampshire
- Herefordshire
- Hertfordshire
- Isle of Wight
- Kent
- Lancashire
- Leicestershire
- Lincolnshire
- Merseyside
- Norfolk
- North Yorkshire
- Northamptonshire
- Northumberland
- Nottinghamshire
- Oxfordshire
- Rutland
- Shropshire
- Somerset
- South Yorkshire
- Staffordshire
- Suffolk
- Surrey
- Tyne and Wear
- Warwickshire
- West Midlands
- West Sussex
- West Yorkshire
- Wiltshire
- Worcestershire
- Clwyd
- Dyfed
- Gwent
- Gwynedd
- Mid Glamorgan
- Powys
- South Glamorgan
- West Glamorgan
- Aberdeen & Aberdeenshire
- Dundee & Angus
- Argyll & Bute
- Ayrshire
- Dumfries & Galloway
- Edinburgh & the Lothians
- Fife
- Forth Valley
- Glasgow & Dunbartonshire
- Lanarkshire
- Renfrewshire & Inverclyde
- Perth & Kinross
- Highlands, Moray & Islands
- Scottish Borders
- County Antrim
- County Armagh
- County Down
- County Fermanagh
- County Londonderry
- County Tyrone