FD60 fire doors in Acton: how we work
Getting FD60 fire doors right in Acton means choosing a certified doorset for each opening and fitting it exactly as tested. That's the whole service: survey, schedule, certified doorset, careful installation and the paperwork to prove it.
We cover W3 and the surrounding area, including Chiswick. Tell us your postcode and preferred dates and we'll confirm a survey slot.
Which rules apply in Acton?
New and replacement fire doors in Acton are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
FD60 fire doors prices in Acton
Budget around £1,050 to £1,650 per single doorset for FD60 fire doors supplied and fitted in Acton, excluding VAT. We price each opening separately so nothing is hidden in a lump sum.
Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Buildings that need FD60 fire doors
Typical uses for FD60 fire doors in Acton include higher-risk stores and stair cores in taller blocks.
London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.
- Higher-risk stores
- Stair cores in taller blocks
- Compartment walls
- Plant and boiler rooms
FD60 Fire Doorsets: key specification
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
From enquiry to handover
- Tell us about the doors — photos help
- Free measure survey at your Acton property
- Door-by-door schedule and fixed price
- Installation and handover pack
Questions about FD60 fire doors in Acton
What does a Acton quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Is the survey in Acton free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Can you work around tenants or staff in Acton?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Is there an FD60S?
Yes. FD60S doorsets have tested smoke seals as well as 60 minutes of fire resistance.
FD60 Fire Doorsets near Acton
- Chiswick (1 mile)
- Shepherd's Bush (2 miles)
- Willesden (2 miles)
- Barnes (2 miles)
- Notting Hill (3 miles)
- Wembley (3 miles)
Other products in Acton
- Acoustic Fire Doors in Acton
- Fire Door Ironmongery & Closers in Acton
- Glazed Fire Doors in Acton
- Fire Door Replacement in Acton
- Riser & Service Cupboard Doors in Acton
- Security Fire Doors in Acton
- FD30S Smoke Control Doorsets in Acton
- Double & Leaf-and-a-Half Fire Doors in Acton
- FD60 Fire Doorsets across Greater London
- All fire doors in Acton