Getting FD60 fire doors fitted in Barking
Fire Rated Doors supplies and fits FD60 fire doors in Barking, Greater London. Whether it's a single replacement or every door in a block, we start by surveying the openings and end with a handover pack listing each doorset and its certificate reference.
Barking is about 9 miles from London; we cover both, along with Ilford, Becontree and Thamesmead.
What the law says in Barking
Fire doors in Barking sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
Cost of FD60 fire doors in Greater London
Our guide price for FD60 fire doors in Barking is £1,050 to £1,650 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.
Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.
Where FD60 fire doors are used in Barking
Stair cores in taller blocks and plant and boiler rooms are among the most common settings for FD60 fire doors, in Barking as elsewhere.
London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.
- Stair cores in taller blocks
- Plant and boiler rooms
- Higher-risk stores
- Compartment walls
What's in the doorset
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
Four steps to compliant doors
- Request a quote online or call
- Survey: sizes, ratings, hardware and condition
- Quote with each doorset's certification
- Phased fitting and handover records
Common questions in Greater London
Will I get certificates for the doors fitted in Barking?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Can you fit just one door in Barking?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Greater London.
How quickly can you survey in Barking?
We arrange surveys around your access needs and, where possible, combine Barking visits with other work in Greater London. Tell us your preferred dates when you enquire.
Can I use an FD60 door where FD30 is required?
Yes — a higher rating meets a lower requirement — but it is heavier and dearer, so we only recommend it where the location calls for it or you want a margin.
FD60 Fire Doorsets near Barking
- Ilford (2 miles)
- Becontree (2 miles)
- Thamesmead (2 miles)
- Canning Town (3 miles)
- Stratford (4 miles)
- Dagenham (4 miles)
Also available in Barking
- Steel Fire Doors in Barking
- Composite Fire Doors in Barking
- Fire Door Replacement in Barking
- Acoustic Fire Doors in Barking
- FD90 & FD120 Doorsets in Barking
- Stairwell & Escape Route Doors in Barking
- Double & Leaf-and-a-Half Fire Doors in Barking
- Riser & Service Cupboard Doors in Barking
- FD60 Fire Doorsets across Greater London
- All fire doors in Barking