Certified FD60 fire doors for Fulham
If your fire risk assessment in Fulham has flagged doors to replace, we can schedule, quote and fit FD60 doorsets for compartment walls, cores and plant rooms to match its recommendations. Surveys in SW6 are free and quotes are fixed and itemised.
Fulham is about 4 miles from London. Wherever your building is in SW6, we arrange survey and fitting dates around access and occupancy.
What the law says in Fulham
In Fulham, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.
Cost of FD60 fire doors in Greater London
Our guide price for FD60 fire doors in Fulham is £1,050 to £1,650 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.
The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.
Where FD60 fire doors are used in Fulham
Compartment walls and stair cores in taller blocks are among the most common settings for FD60 fire doors, in Fulham as elsewhere.
London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.
- Compartment walls
- Stair cores in taller blocks
- Plant and boiler rooms
- Higher-risk stores
What you get with each doorset
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
Four steps to compliant doors
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
FD60 fire doors in Fulham: questions
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Fulham.
Can you fit just one door in Fulham?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Greater London.
Which rules do FD60 fire doors in Fulham need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Can I use an FD60 door where FD30 is required?
Yes — a higher rating meets a lower requirement — but it is heavier and dearer, so we only recommend it where the location calls for it or you want a margin.
Neighbouring areas
- Chelsea (1 mile)
- Putney (2 miles)
- Battersea (2 miles)
- Shepherd's Bush (2 miles)
- Barnes (2 miles)
- Notting Hill (2 miles)
More doorsets for Fulham
- Fire Door Ironmongery & Closers in Fulham
- HMO Fire Doors in Fulham
- Flat Entrance Fire Doors in Fulham
- Riser & Service Cupboard Doors in Fulham
- Acoustic Fire Doors in Fulham
- FD30 Fire Doorsets in Fulham
- Fire Exit Doors in Fulham
- Security Fire Doors in Fulham
- FD60 Fire Doorsets across Greater London
- All fire doors in Fulham