Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD60E60 / EI6054mm leaf

FD60 Fire Doorsets in Southall

We supply and fit FD60 fire doors in Southall (UB1) as complete certified doorsets — with a free measure survey, a fixed itemised quote listing every certificate reference, and installation exactly as tested.

From £1,050 per single doorset in Southall, supplied & fitted, ex VAT

Oak-veneered fire doorset pair with vision panel beside a concrete stair

Our Southall supply and fit service

We cover Southall and nearby Greenford for FD60 fire doors, with surveys booked around your building's access and occupancy. Each door is quoted individually, so you can see what every opening costs and why.

Southall is about 11 miles from London. Wherever your building is in UB1, we arrange survey and fitting dates around access and occupancy.

Regulations for FD60 fire doors in Greater London

Because Southall is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.

Cost of FD60 fire doors in Greater London

Our guide price for FD60 fire doors in Southall is £1,050 to £1,650 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.

Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.

Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.

Where FD60 fire doors are used in Southall

Wherever they are in Southall, FD60 fire doors are most often specified for higher-risk stores and stair cores in taller blocks.

London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.

  • Higher-risk stores
  • Stair cores in taller blocks
  • Compartment walls
  • Plant and boiler rooms

FD60 Fire Doorsets: key specification

Fire resistance60 minutes integrity (FD60 / E60); EI60 where specified
Typical leaf54mm timber or steel
Smoke controlFD60S available with tested smoke seals
Typical useCompartment walls, firefighting shafts, plant rooms
HingesUsually four hinges on timber leaves, per test evidence
Elevation drawing of fd60 fire doorsets

See the full specification and options for FD60 Fire Doorsets

Four steps to compliant doors

  1. Tell us about the doors — photos help
  2. Free measure survey at your Southall property
  3. Door-by-door schedule and fixed price
  4. Installation and handover pack

FD60 fire doors in Southall: questions

Will I get certificates for the doors fitted in Southall?

Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.

Do you cover Southall?

Yes. We survey, supply and fit FD60 fire doors throughout Southall and the rest of Greater London, including UB1 and nearby Greenford.

Can you work around tenants or staff in Southall?

Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.

Is there an FD60S?

Yes. FD60S doorsets have tested smoke seals as well as 60 minutes of fire resistance.

FD60 Fire Doorsets near Southall

Other products in Southall

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.