Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD60E60 / EI6054mm leaf

FD60 Fire Doorsets in Pimlico

We supply and fit FD60 fire doors in Pimlico (SW1V) as complete certified doorsets — with a free measure survey, a fixed itemised quote listing every certificate reference, and installation exactly as tested.

From £1,050 per single doorset in Pimlico, supplied & fitted, ex VAT

Oak-veneered fire doorset pair with vision panel beside a concrete stair

Our Pimlico supply and fit service

Need FD60 fire doors in Pimlico? We supply and fit complete certified doorsets across Greater London, starting with a free measure survey in and around SW1V. Every quote lists each door, its rating and the manufacturer's certificate reference, so you know exactly what is going in before anything is ordered.

Pimlico is about 1 mile from London; we cover both, along with Westminster, Battersea and Chelsea.

Fire door rules in Pimlico

In Pimlico, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.

Guide prices in Pimlico

Expect roughly £1,050–£1,650 per single doorset for FD60 fire doors, fitted, ex VAT. Your Pimlico quote is fixed after survey and itemised door by door.

Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.

Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.

Where FD60 fire doors are needed

Wherever they are in Pimlico, FD60 fire doors are most often specified for higher-risk stores and plant and boiler rooms.

London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.

  • Higher-risk stores
  • Plant and boiler rooms
  • Compartment walls
  • Stair cores in taller blocks

What's in the doorset

Fire resistance60 minutes integrity (FD60 / E60); EI60 where specified
Typical leaf54mm timber or steel
Smoke controlFD60S available with tested smoke seals
Typical useCompartment walls, firefighting shafts, plant rooms
HingesUsually four hinges on timber leaves, per test evidence
Elevation drawing of fd60 fire doorsets

See the full specification and options for FD60 Fire Doorsets

From enquiry to handover

  1. Send your postcode, door count and any fire risk assessment notes
  2. We survey and measure each opening for free
  3. You get a fixed, itemised quote with certificate references
  4. We fit, test operation and hand over the paperwork

Questions about FD60 fire doors in Pimlico

Do you remove the old doors?

Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Pimlico.

Will I get certificates for the doors fitted in Pimlico?

Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.

How quickly can you survey in Pimlico?

We arrange surveys around your access needs and, where possible, combine Pimlico visits with other work in Greater London. Tell us your preferred dates when you enquire.

Is there an FD60S?

Yes. FD60S doorsets have tested smoke seals as well as 60 minutes of fire resistance.

Neighbouring areas

Other products in Pimlico

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.