Certified FD60 fire doors for Kilburn
We cover Kilburn and nearby Cricklewood for FD60 fire doors, with surveys booked around your building's access and occupancy. Each door is quoted individually, so you can see what every opening costs and why.
Whether your building is in central Kilburn or on its edges towards Cricklewood, survey and fitting dates are arranged around your access needs, with occupied buildings worked in planned phases.
Regulations for FD60 fire doors in Greater London
New and replacement fire doors in Kilburn are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
Guide prices in Kilburn
Our guide price for FD60 fire doors in Kilburn is £1,050 to £1,650 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.
Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.
Where FD60 fire doors are needed
Typical uses for FD60 fire doors in Kilburn include plant and boiler rooms and higher-risk stores.
London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.
- Plant and boiler rooms
- Higher-risk stores
- Stair cores in taller blocks
- Compartment walls
Doorset specification
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
How it works in Kilburn
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
FD60 fire doors in Kilburn: questions
What does a Kilburn quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
How quickly can you survey in Kilburn?
We arrange surveys around your access needs and, where possible, combine Kilburn visits with other work in Greater London. Tell us your preferred dates when you enquire.
Will I get certificates for the doors fitted in Kilburn?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Can I use an FD60 door where FD30 is required?
Yes — a higher rating meets a lower requirement — but it is heavier and dearer, so we only recommend it where the location calls for it or you want a margin.
Also covering towns near Kilburn
- Cricklewood (1 mile)
- Chalk Farm (2 miles)
- Camden Town (2 miles)
- Willesden (2 miles)
- Archway (2 miles)
- Holloway (3 miles)
Also available in Kilburn
- Communal & Corridor Fire Doors in Kilburn
- Composite Fire Doors in Kilburn
- Fire Doors for Homes in Kilburn
- Fire-Rated Screens & Fanlights in Kilburn
- School & Healthcare Fire Doors in Kilburn
- Double & Leaf-and-a-Half Fire Doors in Kilburn
- FD90 & FD120 Doorsets in Kilburn
- Fire Door Replacement in Kilburn
- FD60 Fire Doorsets across Greater London
- All fire doors in Kilburn