Certified FD60 fire doors for Battersea
Need FD60 fire doors in Battersea? We supply and fit complete certified doorsets across Greater London, starting with a free measure survey in and around SW11. Every quote lists each door, its rating and the manufacturer's certificate reference, so you know exactly what is going in before anything is ordered.
Where possible we combine Battersea surveys with other visits in Greater London, such as Chelsea and Pimlico, which helps keep survey dates flexible.
Which rules apply in Battersea?
Because Battersea is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
Guide prices in Battersea
Our guide for FD60 fire doors is £1,050–£1,650 per single doorset fitted, ex VAT. Quotes for Battersea are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.
Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.
Buildings that need FD60 fire doors
Wherever they are in Battersea, FD60 fire doors are most often specified for compartment walls and plant and boiler rooms.
London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.
- Compartment walls
- Plant and boiler rooms
- Stair cores in taller blocks
- Higher-risk stores
What's in the doorset
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
From enquiry to handover
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Questions about FD60 fire doors in Battersea
Is the survey in Battersea free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
How quickly can you survey in Battersea?
We arrange surveys around your access needs and, where possible, combine Battersea visits with other work in Greater London. Tell us your preferred dates when you enquire.
What does a Battersea quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
How thick is an FD60 door?
Typically 54mm for timber doorsets. Steel FD60 doors vary by manufacturer.
Neighbouring areas
- Chelsea (1 mile)
- Pimlico (1 mile)
- Westminster (2 miles)
- Fulham (2 miles)
- Brixton (2 miles)
- London (2 miles)
Other products in Battersea
- Flat Entrance Fire Doors in Battersea
- Timber Fire Doorsets in Battersea
- Double & Leaf-and-a-Half Fire Doors in Battersea
- School & Healthcare Fire Doors in Battersea
- Stairwell & Escape Route Doors in Battersea
- Commercial & Office Fire Doors in Battersea
- Security Fire Doors in Battersea
- Fire Exit Doors in Battersea
- FD60 Fire Doorsets across Greater London
- All fire doors in Battersea