Getting FD60 fire doors fitted in Hayes
If your fire risk assessment in Hayes has flagged doors to replace, we can schedule, quote and fit FD60 doorsets for compartment walls, cores and plant rooms to match its recommendations. Surveys in UB3 are free and quotes are fixed and itemised.
Where possible we combine Hayes surveys with other visits in Greater London, such as Southall and Heston, which helps keep survey dates flexible.
What the law says in Hayes
Because Hayes is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
Cost of FD60 fire doors in Greater London
Our guide for FD60 fire doors is £1,050–£1,650 per single doorset fitted, ex VAT. Quotes for Hayes are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Typical uses in Hayes
Plant and boiler rooms and stair cores in taller blocks are among the most common settings for FD60 fire doors, in Hayes as elsewhere.
London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.
- Plant and boiler rooms
- Stair cores in taller blocks
- Higher-risk stores
- Compartment walls
What you get with each doorset
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
What happens next
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Questions about FD60 fire doors in Hayes
Can you work around tenants or staff in Hayes?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
What does a Hayes quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Hayes.
Can I use an FD60 door where FD30 is required?
Yes — a higher rating meets a lower requirement — but it is heavier and dearer, so we only recommend it where the location calls for it or you want a margin.
Nearby towns we cover
- Southall (2 miles)
- Heston (3 miles)
- Greenford (3 miles)
- Northolt (3 miles)
- Uxbridge (3 miles)
- Ruislip (4 miles)
Other fire doors in Hayes
- Riser & Service Cupboard Doors in Hayes
- Stairwell & Escape Route Doors in Hayes
- Fire Doors for Homes in Hayes
- FD90 & FD120 Doorsets in Hayes
- Communal & Corridor Fire Doors in Hayes
- Steel Fire Doors in Hayes
- Commercial & Office Fire Doors in Hayes
- Glazed Fire Doors in Hayes
- FD60 Fire Doorsets across Greater London
- All fire doors in Hayes