FD60 fire doors in Peckham: how we work
If your fire risk assessment in Peckham has flagged doors to replace, we can schedule, quote and fit FD60 doorsets for compartment walls, cores and plant rooms to match its recommendations. Surveys in SE15 are free and quotes are fixed and itemised.
Peckham is about 3 miles from London; we cover both, along with Brixton, Greenwich and Catford.
Regulations for FD60 fire doors in Greater London
In Peckham, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.
Cost of FD60 fire doors in Greater London
Our guide price for FD60 fire doors in Peckham is £1,050 to £1,650 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.
The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.
Where FD60 fire doors are needed
Typical uses for FD60 fire doors in Peckham include higher-risk stores and stair cores in taller blocks.
London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.
- Higher-risk stores
- Stair cores in taller blocks
- Compartment walls
- Plant and boiler rooms
What you get with each doorset
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
What happens next
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Questions about FD60 fire doors in Peckham
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Peckham.
What does a Peckham quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Can you fit just one door in Peckham?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Greater London.
Can I use an FD60 door where FD30 is required?
Yes — a higher rating meets a lower requirement — but it is heavier and dearer, so we only recommend it where the location calls for it or you want a margin.
Also covering towns near Peckham
- Brixton (2 miles)
- Greenwich (2 miles)
- Catford (3 miles)
- Canary Wharf (3 miles)
- Pimlico (3 miles)
- Westminster (3 miles)
Also available in Peckham
- Timber Fire Doorsets in Peckham
- School & Healthcare Fire Doors in Peckham
- Composite Fire Doors in Peckham
- Glazed Fire Doors in Peckham
- Stairwell & Escape Route Doors in Peckham
- Fire Door Ironmongery & Closers in Peckham
- Double & Leaf-and-a-Half Fire Doors in Peckham
- Flat Entrance Fire Doors in Peckham
- FD60 Fire Doorsets across Greater London
- All fire doors in Peckham