FD60 fire doors in Camden Town: how we work
Fire Rated Doors supplies and fits FD60 fire doors in Camden Town, Greater London. Whether it's a single replacement or every door in a block, we start by surveying the openings and end with a handover pack listing each doorset and its certificate reference.
Camden Town is about 2 miles from London. Wherever your building is in NW1, we arrange survey and fitting dates around access and occupancy.
What the law says in Camden Town
In Camden Town, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.
FD60 fire doors prices in Camden Town
Expect roughly £1,050–£1,650 per single doorset for FD60 fire doors, fitted, ex VAT. Your Camden Town quote is fixed after survey and itemised door by door.
Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.
The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.
Buildings that need FD60 fire doors
Stair cores in taller blocks and higher-risk stores are among the most common settings for FD60 fire doors, in Camden Town as elsewhere.
London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.
- Stair cores in taller blocks
- Higher-risk stores
- Plant and boiler rooms
- Compartment walls
FD60 Fire Doorsets: key specification
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
Four steps to compliant doors
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Your questions answered
Which rules do FD60 fire doors in Camden Town need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Camden Town.
What does a Camden Town quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
How thick is an FD60 door?
Typically 54mm for timber doorsets. Steel FD60 doors vary by manufacturer.
Nearby towns we cover
- Chalk Farm (1 mile)
- Holloway (1 mile)
- Islington (2 miles)
- Archway (2 miles)
- Highbury (2 miles)
- Kilburn (2 miles)
Also available in Camden Town
- Communal & Corridor Fire Doors in Camden Town
- Fire Exit Doors in Camden Town
- Fire Door Replacement in Camden Town
- Fire-Rated Screens & Fanlights in Camden Town
- Fire Door Supply & Fit in Camden Town
- FD30 Fire Doorsets in Camden Town
- Timber Fire Doorsets in Camden Town
- Acoustic Fire Doors in Camden Town
- FD60 Fire Doorsets across Greater London
- All fire doors in Camden Town