FD60 Fire Doorsets for Ilford buildings
Need FD60 fire doors in Ilford? We supply and fit complete certified doorsets across Greater London, starting with a free measure survey in and around IG1. Every quote lists each door, its rating and the manufacturer's certificate reference, so you know exactly what is going in before anything is ordered.
Where possible we combine Ilford surveys with other visits in Greater London, such as Barking and Becontree, which helps keep survey dates flexible.
Fire door rules in Ilford
Because Ilford is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
Cost of FD60 fire doors in Greater London
Our guide for FD60 fire doors is £1,050–£1,650 per single doorset fitted, ex VAT. Quotes for Ilford are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.
We show each door's price separately, so if budget is tight you can phase the work and start with the doors your fire risk assessment prioritises.
Buildings that need FD60 fire doors
Typical uses for FD60 fire doors in Ilford include higher-risk stores and plant and boiler rooms.
London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.
- Higher-risk stores
- Plant and boiler rooms
- Compartment walls
- Stair cores in taller blocks
What's in the doorset
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
Four steps to compliant doors
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
FD60 fire doors in Ilford: questions
What does a Ilford quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Do you cover Ilford?
Yes. We survey, supply and fit FD60 fire doors throughout Ilford and the rest of Greater London, including IG1 and nearby Barking.
Do you work for landlords and managing agents in Ilford?
Yes. We can schedule doors flat by flat, send quotes per property and invoice the managing agent or freeholder.
Can I use an FD60 door where FD30 is required?
Yes — a higher rating meets a lower requirement — but it is heavier and dearer, so we only recommend it where the location calls for it or you want a margin.
Nearby towns we cover
- Barking (2 miles)
- Becontree (2 miles)
- Leytonstone (3 miles)
- Stratford (4 miles)
- Canning Town (4 miles)
- Dagenham (4 miles)
Also available in Ilford
- Commercial & Office Fire Doors in Ilford
- School & Healthcare Fire Doors in Ilford
- FD30 Fire Doorsets in Ilford
- Flat Entrance Fire Doors in Ilford
- HMO Fire Doors in Ilford
- Fire Door Ironmongery & Closers in Ilford
- Fire Exit Doors in Ilford
- Double & Leaf-and-a-Half Fire Doors in Ilford
- FD60 Fire Doorsets across Greater London
- All fire doors in Ilford