Our Romford supply and fit service
Need FD60 fire doors in Romford? We supply and fit complete certified doorsets across Greater London, starting with a free measure survey in and around RM1. Every quote lists each door, its rating and the manufacturer's certificate reference, so you know exactly what is going in before anything is ordered.
We cover RM1 and the surrounding area, including Hornchurch. Tell us your postcode and preferred dates and we'll confirm a survey slot.
What the law says in Romford
Because Romford is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
What do FD60 fire doors cost in Romford?
Budget around £1,050 to £1,650 per single doorset for FD60 fire doors supplied and fitted in Romford, excluding VAT. We price each opening separately so nothing is hidden in a lump sum.
Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Where FD60 fire doors are needed
Wherever they are in Romford, FD60 fire doors are most often specified for higher-risk stores and stair cores in taller blocks.
London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.
- Higher-risk stores
- Stair cores in taller blocks
- Plant and boiler rooms
- Compartment walls
FD60 Fire Doorsets: key specification
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
How it works in Romford
- Request a quote online or call
- Survey: sizes, ratings, hardware and condition
- Quote with each doorset's certification
- Phased fitting and handover records
Common questions in Greater London
Will I get certificates for the doors fitted in Romford?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Can you fit just one door in Romford?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Greater London.
Which rules do FD60 fire doors in Romford need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Do FD60 doors need different closers?
Often a stronger closer, sized to the heavier leaf, still keeping opening forces within Approved Document M limits where accessibility applies.
Also covering towns near Romford
- Hornchurch (2 miles)
- Dagenham (2 miles)
- Becontree (3 miles)
- Ilford (5 miles)
- Barking (5 miles)
- Thamesmead (6 miles)
Other fire doors in Romford
- Riser & Service Cupboard Doors in Romford
- Steel Fire Doors in Romford
- HMO Fire Doors in Romford
- Acoustic Fire Doors in Romford
- Fire Exit Doors in Romford
- Double & Leaf-and-a-Half Fire Doors in Romford
- FD30 Fire Doorsets in Romford
- FD30S Smoke Control Doorsets in Romford
- FD60 Fire Doorsets across Greater London
- All fire doors in Romford