FD60 fire doors in Catford: how we work
Looking for FD60 fire doors in Catford? Our supply and fit service covers SE6 and the surrounding area, including Blackheath and Greenwich. We quote complete doorsets — leaf, frame, seals, hinges and closer — because that is what the fire certification actually covers.
Where possible we combine Catford surveys with other visits in Greater London, such as Blackheath and Greenwich, which helps keep survey dates flexible.
Which rules apply in Catford?
In Catford, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.
Guide prices in Catford
Our guide for FD60 fire doors is £1,050–£1,650 per single doorset fitted, ex VAT. Quotes for Catford are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.
Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.
Buildings that need FD60 fire doors
Wherever they are in Catford, FD60 fire doors are most often specified for stair cores in taller blocks and plant and boiler rooms.
London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.
- Stair cores in taller blocks
- Plant and boiler rooms
- Compartment walls
- Higher-risk stores
What's in the doorset
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
What happens next
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Questions about FD60 fire doors in Catford
Is the survey in Catford free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Can you fit just one door in Catford?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Greater London.
Will I get certificates for the doors fitted in Catford?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
How thick is an FD60 door?
Typically 54mm for timber doorsets. Steel FD60 doors vary by manufacturer.
FD60 Fire Doorsets near Catford
- Blackheath (2 miles)
- Greenwich (2 miles)
- Beckenham (2 miles)
- Peckham (3 miles)
- Eltham (3 miles)
- Brixton (4 miles)
More doorsets for Catford
- Double & Leaf-and-a-Half Fire Doors in Catford
- Flat Entrance Fire Doors in Catford
- Riser & Service Cupboard Doors in Catford
- Fire Door Ironmongery & Closers in Catford
- Acoustic Fire Doors in Catford
- HMO Fire Doors in Catford
- Fire Door Supply & Fit in Catford
- FD90 & FD120 Doorsets in Catford
- FD60 Fire Doorsets across Greater London
- All fire doors in Catford