Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD60E60 / EI6054mm leaf

FD60 Fire Doorsets in Buckinghamshire

We supply and fit FD60 fire doors throughout Buckinghamshire, including Milton Keynes, High Wycombe and Aylesbury, as complete certified doorsets with a free survey and a fixed, itemised quote.

From £1,050 per single doorset in Buckinghamshire, supplied & fitted, ex VAT

Oak-veneered fire doorset pair with vision panel beside a concrete stair

Getting FD60 fire doors fitted in Buckinghamshire

Our Buckinghamshire service covers FD60 fire doors for flats, HMOs, workplaces, schools and homes, including Milton Keynes, High Wycombe and Aylesbury.

Which rules apply in Buckinghamshire?

New and replacement fire doors in Buckinghamshire are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.

Cost of FD60 fire doors in Buckinghamshire

Our guide for FD60 fire doors is £1,050–£1,650 per single doorset fitted, ex VAT. Quotes for Buckinghamshire are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.

Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.

Where FD60 fire doors are needed

Buckinghamshire runs from Milton Keynes' modern estates, offices and warehouses to period market towns with converted commercial buildings.

  • Compartment walls
  • Stair cores in taller blocks
  • Plant and boiler rooms
  • Higher-risk stores

What's in the doorset

Fire resistance60 minutes integrity (FD60 / E60); EI60 where specified
Typical leaf54mm timber or steel
Smoke controlFD60S available with tested smoke seals
Typical useCompartment walls, firefighting shafts, plant rooms
HingesUsually four hinges on timber leaves, per test evidence
Elevation drawing of fd60 fire doorsets

See the full specification and options for FD60 Fire Doorsets

From enquiry to handover

  1. Send your postcode, door count and any fire risk assessment notes
  2. We survey and measure each opening for free
  3. You get a fixed, itemised quote with certificate references
  4. We fit, test operation and hand over the paperwork

FD60 fire doors in Buckinghamshire: questions

Will I get certificates for the doors fitted?

Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.

Which rules apply in Buckinghamshire?

Doors are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.

Is the survey free?

Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.

Is there an FD60S?

Yes. FD60S doorsets have tested smoke seals as well as 60 minutes of fire resistance.

Towns in Buckinghamshire we cover for FD60 fire doors

FD60 Fire Doorsets in neighbouring areas

Other fire doors in Buckinghamshire

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.