FD60 fire doors in Stratford: how we work
Need FD60 fire doors in Stratford? We supply and fit complete certified doorsets across Greater London, starting with a free measure survey in and around E15. Every quote lists each door, its rating and the manufacturer's certificate reference, so you know exactly what is going in before anything is ordered.
Stratford is about 6 miles from London; we cover both, along with Bow, Canning Town and Canary Wharf.
What the law says in Stratford
New and replacement fire doors in Stratford are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
What do FD60 fire doors cost in Stratford?
Our guide for FD60 fire doors is £1,050–£1,650 per single doorset fitted, ex VAT. Quotes for Stratford are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.
Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.
Buildings that need FD60 fire doors
Typical uses for FD60 fire doors in Stratford include stair cores in taller blocks and higher-risk stores.
London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.
- Stair cores in taller blocks
- Higher-risk stores
- Compartment walls
- Plant and boiler rooms
What you get with each doorset
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
How it works in Stratford
- Request a quote online or call
- Survey: sizes, ratings, hardware and condition
- Quote with each doorset's certification
- Phased fitting and handover records
FD60 fire doors in Stratford: questions
What does a Stratford quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Which rules do FD60 fire doors in Stratford need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Can you fit just one door in Stratford?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Greater London.
Is there an FD60S?
Yes. FD60S doorsets have tested smoke seals as well as 60 minutes of fire resistance.
Neighbouring areas
- Bow (1 mile)
- Canning Town (2 miles)
- Canary Wharf (2 miles)
- Leytonstone (2 miles)
- Ilford (4 miles)
- Barking (4 miles)
Also available in Stratford
- HMO Fire Doors in Stratford
- Steel Fire Doors in Stratford
- Fire-Rated Screens & Fanlights in Stratford
- Double & Leaf-and-a-Half Fire Doors in Stratford
- Stairwell & Escape Route Doors in Stratford
- Fire Door Supply & Fit in Stratford
- Flat Entrance Fire Doors in Stratford
- FD30 Fire Doorsets in Stratford
- FD60 Fire Doorsets across Greater London
- All fire doors in Stratford