Our Bow supply and fit service
Getting FD60 fire doors right in Bow means choosing a certified doorset for each opening and fitting it exactly as tested. That's the whole service: survey, schedule, certified doorset, careful installation and the paperwork to prove it.
Where possible we combine Bow surveys with other visits in Greater London, such as Stratford and Canary Wharf, which helps keep survey dates flexible.
Regulations for FD60 fire doors in Greater London
Fire doors in Bow sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
Guide prices in Bow
Guide prices for FD60 fire doors in Bow run from about £1,050 to £1,650 per single doorset, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Typical uses in Bow
Typical uses for FD60 fire doors in Bow include higher-risk stores and compartment walls.
London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.
- Higher-risk stores
- Compartment walls
- Stair cores in taller blocks
- Plant and boiler rooms
What you get with each doorset
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
Four steps to compliant doors
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Common questions in Greater London
What does a Bow quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Can you fit just one door in Bow?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Greater London.
Which rules do FD60 fire doors in Bow need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Do FD60 doors need different closers?
Often a stronger closer, sized to the heavier leaf, still keeping opening forces within Approved Document M limits where accessibility applies.
Nearby towns we cover
- Stratford (1 mile)
- Canary Wharf (1 mile)
- Canning Town (2 miles)
- Leytonstone (3 miles)
- Greenwich (3 miles)
- Islington (4 miles)
Other products in Bow
- Fire Door Supply & Fit in Bow
- Fire Door Replacement in Bow
- Fire Doors for Homes in Bow
- Riser & Service Cupboard Doors in Bow
- Fire Door Ironmongery & Closers in Bow
- FD90 & FD120 Doorsets in Bow
- Flat Entrance Fire Doors in Bow
- FD30S Smoke Control Doorsets in Bow
- FD60 Fire Doorsets across Greater London
- All fire doors in Bow