Our Barnes supply and fit service
We fit FD60 doorsets for compartment walls, cores and plant rooms in Barnes and the rest of Greater London. The process is simple: we survey and measure each opening, propose a certified doorset for it, and give you a fixed price. Fitting is booked once the doorsets are made, usually with no door left out of action overnight.
Where possible we combine Barnes surveys with other visits in Greater London, such as Chiswick and Putney, which helps keep survey dates flexible.
What the law says in Barnes
In Barnes, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.
FD60 fire doors prices in Barnes
Guide prices for FD60 fire doors in Barnes run from about £1,050 to £1,650 per single doorset, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Buildings that need FD60 fire doors
In Barnes, FD60 fire doors are typically needed in plant and boiler rooms and stair cores in taller blocks.
London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.
- Plant and boiler rooms
- Stair cores in taller blocks
- Compartment walls
- Higher-risk stores
What you get with each doorset
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
How it works in Barnes
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Common questions in Greater London
Which rules do FD60 fire doors in Barnes need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
What does a Barnes quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Barnes.
Is there an FD60S?
Yes. FD60S doorsets have tested smoke seals as well as 60 minutes of fire resistance.
Nearby towns we cover
- Chiswick (1 mile)
- Putney (2 miles)
- Fulham (2 miles)
- Shepherd's Bush (2 miles)
- Richmond (2 miles)
- Acton (2 miles)
Also available in Barnes
- Riser & Service Cupboard Doors in Barnes
- Security Fire Doors in Barnes
- Glazed Fire Doors in Barnes
- School & Healthcare Fire Doors in Barnes
- Fire Door Ironmongery & Closers in Barnes
- FD30 Fire Doorsets in Barnes
- Steel Fire Doors in Barnes
- Acoustic Fire Doors in Barnes
- FD60 Fire Doorsets across Greater London
- All fire doors in Barnes