Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD60E60 / EI6054mm leaf

FD60 Fire Doorsets in Hoddesdon

We supply and fit FD60 fire doors in Hoddesdon (EN11) as complete certified doorsets — surveyed free, quoted door by door with each manufacturer's certificate reference, and fitted to the manufacturer's instructions.

From £1,050 per single doorset in Hoddesdon, supplied & fitted, ex VAT

Oak-veneered fire doorset pair with vision panel beside a concrete stair

Getting FD60 fire doors fitted in Hoddesdon

Need FD60 fire doors in Hoddesdon? We supply and fit complete certified doorsets across Hertfordshire, starting with a free measure survey in and around EN11. Every quote lists each door, its rating and the manufacturer's certificate reference, so you know exactly what is going in before anything is ordered.

Hoddesdon is about 18 miles from Watford; we cover both, along with Hertford, Cheshunt and Waltham Abbey.

Which rules apply in Hoddesdon?

In Hoddesdon, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.

Cost of FD60 fire doors in Hertfordshire

Expect roughly £1,050–£1,650 per single doorset for FD60 fire doors, fitted, ex VAT. Your Hoddesdon quote is fixed after survey and itemised door by door.

We show each door's price separately, so if budget is tight you can phase the work and start with the doors your fire risk assessment prioritises.

Typical uses in Hoddesdon

Stair cores in taller blocks and higher-risk stores are among the most common settings for FD60 fire doors, in Hoddesdon as elsewhere.

Hertfordshire's new towns — Stevenage, Hatfield, Welwyn Garden City — sit alongside commuter towns with office-to-residential conversions.

  • Stair cores in taller blocks
  • Higher-risk stores
  • Compartment walls
  • Plant and boiler rooms

Doorset specification

Fire resistance60 minutes integrity (FD60 / E60); EI60 where specified
Typical leaf54mm timber or steel
Smoke controlFD60S available with tested smoke seals
Typical useCompartment walls, firefighting shafts, plant rooms
HingesUsually four hinges on timber leaves, per test evidence
Elevation drawing of fd60 fire doorsets

See the full specification and options for FD60 Fire Doorsets

Four steps to compliant doors

  1. Send your postcode, door count and any fire risk assessment notes
  2. We survey and measure each opening for free
  3. You get a fixed, itemised quote with certificate references
  4. We fit, test operation and hand over the paperwork

Your questions answered

Will I get certificates for the doors fitted in Hoddesdon?

Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.

Do you remove the old doors?

Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Hoddesdon.

What does a Hoddesdon quote include?

Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.

Can I use an FD60 door where FD30 is required?

Yes — a higher rating meets a lower requirement — but it is heavier and dearer, so we only recommend it where the location calls for it or you want a margin.

Neighbouring areas

More doorsets for Hoddesdon

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.