Certified FD60 fire doors for Watford
If your fire risk assessment in Watford has flagged doors to replace, we can schedule, quote and fit FD60 doorsets for compartment walls, cores and plant rooms to match its recommendations. Surveys in WD17 are free and quotes are fixed and itemised.
Surveys in Watford are booked around your access needs, and we cover the wider Hertfordshire area too.
Regulations for FD60 fire doors in Hertfordshire
Because Watford is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
Cost of FD60 fire doors in Hertfordshire
Guide prices for FD60 fire doors in Watford run from about £1,050 to £1,650 per single doorset, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Typical uses in Watford
Typical uses for FD60 fire doors in Watford include higher-risk stores and compartment walls.
Hertfordshire's new towns — Stevenage, Hatfield, Welwyn Garden City — sit alongside commuter towns with office-to-residential conversions.
- Higher-risk stores
- Compartment walls
- Plant and boiler rooms
- Stair cores in taller blocks
What's in the doorset
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
How it works in Watford
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Common questions in Hertfordshire
How quickly can you survey in Watford?
We arrange surveys around your access needs and, where possible, combine Watford visits with other work in Hertfordshire. Tell us your preferred dates when you enquire.
What does a Watford quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Can you work around tenants or staff in Watford?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
How thick is an FD60 door?
Typically 54mm for timber doorsets. Steel FD60 doors vary by manufacturer.
Also covering towns near Watford
- Bushey (2 miles)
- North Watford (2 miles)
- Rickmansworth (4 miles)
- Borehamwood (5 miles)
- Ruislip (6 miles)
- Harrow (6 miles)
Also available in Watford
- HMO Fire Doors in Watford
- Fire Exit Doors in Watford
- Acoustic Fire Doors in Watford
- Composite Fire Doors in Watford
- Steel Fire Doors in Watford
- Commercial & Office Fire Doors in Watford
- Communal & Corridor Fire Doors in Watford
- Fire Door Supply & Fit in Watford
- FD60 Fire Doorsets across Hertfordshire
- All fire doors in Watford