Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD30SPairsHold-open

Communal & Corridor Fire Doors in Hertfordshire

We supply and fit communal fire doors throughout Hertfordshire, including Watford, Hemel Hempstead and Stevenage, as complete certified doorsets with a free survey and a fixed, itemised quote.

From £1,600 per pair in Hertfordshire, supplied & fitted, ex VAT

Pair of white timber cross-corridor fire doors with vision panels and hold-open devices

Communal fire doors in Hertfordshire: how we work

We supply and fit communal fire doors across Hertfordshire, including Watford, Hemel Hempstead and Stevenage. Every job starts with a free measure survey and ends with a handover pack listing each certified doorset fitted.

What the law says in Hertfordshire

Because Hertfordshire is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.

Cost of communal fire doors in Hertfordshire

Expect roughly £1,600–£3,200 per pair for communal fire doors, fitted, ex VAT. Your Hertfordshire quote is fixed after survey and itemised door by door.

The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.

Where communal fire doors are needed

Hertfordshire's new towns — Stevenage, Hatfield, Welwyn Garden City — sit alongside commuter towns with office-to-residential conversions.

  • Blocks of flats
  • Sheltered and supported housing
  • Student accommodation
  • Hotels

What's in the doorset

RatingFD30S typical; FD60S in some lobbies
ConfigurationSingles, pairs and leaf-and-a-half
GlazingVision panels sized to the doorset's evidence
Hold-openAlarm-linked magnetic hold-open or free-swing closers (BS EN 1155)
AccessibilityOpening forces and vision panels to accessibility guidance (Approved Document M in England)
Elevation drawing of communal & corridor fire doors

See the full specification and options for Communal & Corridor Fire Doors

What happens next

  1. Share your FRA or inspection findings
  2. We confirm every door on site
  3. Fixed quote, certified doorsets only
  4. Fitted to the manufacturer's instructions, with photos

Your questions answered

Which rules apply in Hertfordshire?

Doors are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.

Can you fit just one door?

Yes — from a single door to a full building.

Can you work around tenants or staff?

Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.

Can communal fire doors be held open?

Only with an approved hold-open or free-swing device linked to the fire alarm. Wedges and hooks are not acceptable.

Towns in Hertfordshire we cover for communal fire doors

Communal & Corridor Fire Doors in neighbouring areas

Other fire doors in Hertfordshire

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.