Getting FD60 fire doors fitted in Potters Bar
For landlords, managing agents, businesses and homeowners in Potters Bar, we provide FD60 doorsets for compartment walls, cores and plant rooms with one fixed quote. A free survey comes first, then a door-by-door schedule, then installation to the manufacturer's instructions and a handover pack for your records.
Our Hertfordshire coverage includes Potters Bar and its neighbours Hadley Wood, Barnet and Enfield; tell us your postcode and preferred dates and we'll confirm a survey slot.
Which rules apply in Potters Bar?
Because Potters Bar is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
Cost of FD60 fire doors in Hertfordshire
Our guide for FD60 fire doors is £1,050–£1,650 per single doorset fitted, ex VAT. Quotes for Potters Bar are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.
Where FD60 fire doors are used in Potters Bar
Wherever they are in Potters Bar, FD60 fire doors are most often specified for plant and boiler rooms and compartment walls.
Hertfordshire's new towns — Stevenage, Hatfield, Welwyn Garden City — sit alongside commuter towns with office-to-residential conversions.
- Plant and boiler rooms
- Compartment walls
- Higher-risk stores
- Stair cores in taller blocks
FD60 Fire Doorsets: key specification
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
Four steps to compliant doors
- Request a quote online or call
- Survey: sizes, ratings, hardware and condition
- Quote with each doorset's certification
- Phased fitting and handover records
FD60 fire doors in Potters Bar: questions
Can you work around tenants or staff in Potters Bar?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
What does a Potters Bar quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Potters Bar.
Do FD60 doors need different closers?
Often a stronger closer, sized to the heavier leaf, still keeping opening forces within Approved Document M limits where accessibility applies.
Also covering towns near Potters Bar
- Hadley Wood (2 miles)
- Barnet (3 miles)
- Enfield (5 miles)
- Borehamwood (5 miles)
- Hatfield (5 miles)
- Cheshunt (6 miles)
More doorsets for Potters Bar
- Riser & Service Cupboard Doors in Potters Bar
- Fire Door Replacement in Potters Bar
- Fire-Rated Screens & Fanlights in Potters Bar
- Flat Entrance Fire Doors in Potters Bar
- Composite Fire Doors in Potters Bar
- HMO Fire Doors in Potters Bar
- FD90 & FD120 Doorsets in Potters Bar
- Fire Exit Doors in Potters Bar
- FD60 Fire Doorsets across Hertfordshire
- All fire doors in Potters Bar