Getting FD60 fire doors fitted in Harpenden
For landlords, managing agents, businesses and homeowners in Harpenden, we provide FD60 doorsets for compartment walls, cores and plant rooms with one fixed quote. A free survey comes first, then a door-by-door schedule, then installation to the manufacturer's instructions and a handover pack for your records.
Harpenden is about 11 miles from Watford. Wherever your building is in AL5, we arrange survey and fitting dates around access and occupancy.
Fire door rules in Harpenden
Fire doors in Harpenden sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
Guide prices in Harpenden
Expect roughly £1,050–£1,650 per single doorset for FD60 fire doors, fitted, ex VAT. Your Harpenden quote is fixed after survey and itemised door by door.
Guide prices assume straightforward access; out-of-hours working or difficult access is priced as a separate, visible line.
Where FD60 fire doors are used in Harpenden
Typical uses for FD60 fire doors in Harpenden include stair cores in taller blocks and higher-risk stores.
Hertfordshire's new towns — Stevenage, Hatfield, Welwyn Garden City — sit alongside commuter towns with office-to-residential conversions.
- Stair cores in taller blocks
- Higher-risk stores
- Compartment walls
- Plant and boiler rooms
What you get with each doorset
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
From enquiry to handover
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Common questions in Hertfordshire
What does a Harpenden quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Can you fit just one door in Harpenden?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Hertfordshire.
Do you cover Harpenden?
Yes. We survey, supply and fit FD60 fire doors throughout Harpenden and the rest of Hertfordshire, including AL5 and nearby St Albans.
Do FD60 doors need different closers?
Often a stronger closer, sized to the heavier leaf, still keeping opening forces within Approved Document M limits where accessibility applies.
Also covering towns near Harpenden
- St Albans (5 miles)
- Luton (5 miles)
- Hemel Hempstead (6 miles)
- Welwyn Garden City (6 miles)
- Hatfield (7 miles)
- Dunstable (9 miles)
Other fire doors in Harpenden
- HMO Fire Doors in Harpenden
- Commercial & Office Fire Doors in Harpenden
- Composite Fire Doors in Harpenden
- Timber Fire Doorsets in Harpenden
- Communal & Corridor Fire Doors in Harpenden
- Fire Door Ironmongery & Closers in Harpenden
- Fire Exit Doors in Harpenden
- Fire Door Supply & Fit in Harpenden
- FD60 Fire Doorsets across Hertfordshire
- All fire doors in Harpenden