Certified FD60 fire doors for Borehamwood
Need FD60 fire doors in Borehamwood? We supply and fit complete certified doorsets across Hertfordshire, starting with a free measure survey in and around WD6. Every quote lists each door, its rating and the manufacturer's certificate reference, so you know exactly what is going in before anything is ordered.
Borehamwood is about 5 miles from Watford; we cover both, along with Barnet, Bushey and Hadley Wood.
Regulations for FD60 fire doors in Hertfordshire
In Borehamwood, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.
What do FD60 fire doors cost in Borehamwood?
Our guide for FD60 fire doors is £1,050–£1,650 per single doorset fitted, ex VAT. Quotes for Borehamwood are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
Guide prices assume straightforward access; out-of-hours working or difficult access is priced as a separate, visible line.
Where FD60 fire doors are needed
In Borehamwood, FD60 fire doors are typically needed in plant and boiler rooms and higher-risk stores.
Hertfordshire's new towns — Stevenage, Hatfield, Welwyn Garden City — sit alongside commuter towns with office-to-residential conversions.
- Plant and boiler rooms
- Higher-risk stores
- Stair cores in taller blocks
- Compartment walls
Doorset specification
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
Four steps to compliant doors
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
FD60 fire doors in Borehamwood: questions
Will I get certificates for the doors fitted in Borehamwood?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Do you cover Borehamwood?
Yes. We survey, supply and fit FD60 fire doors throughout Borehamwood and the rest of Hertfordshire, including WD6 and nearby Barnet.
What does a Borehamwood quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
How thick is an FD60 door?
Typically 54mm for timber doorsets. Steel FD60 doors vary by manufacturer.
Also covering towns near Borehamwood
- Barnet (3 miles)
- Bushey (4 miles)
- Hadley Wood (5 miles)
- Potters Bar (5 miles)
- Watford (5 miles)
- Finchley (5 miles)
Other products in Borehamwood
- Flat Entrance Fire Doors in Borehamwood
- School & Healthcare Fire Doors in Borehamwood
- Glazed Fire Doors in Borehamwood
- Fire Doors for Homes in Borehamwood
- Communal & Corridor Fire Doors in Borehamwood
- Security Fire Doors in Borehamwood
- Fire Door Supply & Fit in Borehamwood
- Riser & Service Cupboard Doors in Borehamwood
- FD60 Fire Doorsets across Hertfordshire
- All fire doors in Borehamwood