Certified FD60 fire doors for Welwyn Garden City
We cover Welwyn Garden City and nearby Hatfield for FD60 fire doors, with surveys booked around your building's access and occupancy. Each door is quoted individually, so you can see what every opening costs and why.
Welwyn Garden City is about 13 miles from Watford. Wherever your building is in AL8, we arrange survey and fitting dates around access and occupancy.
Fire door rules in Welwyn Garden City
Because Welwyn Garden City is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
What do FD60 fire doors cost in Welwyn Garden City?
Our guide for FD60 fire doors is £1,050–£1,650 per single doorset fitted, ex VAT. Quotes for Welwyn Garden City are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Where FD60 fire doors are needed
In Welwyn Garden City, FD60 fire doors are typically needed in higher-risk stores and plant and boiler rooms.
Hertfordshire's new towns — Stevenage, Hatfield, Welwyn Garden City — sit alongside commuter towns with office-to-residential conversions.
- Higher-risk stores
- Plant and boiler rooms
- Stair cores in taller blocks
- Compartment walls
Doorset specification
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
Four steps to compliant doors
- Tell us about the doors — photos help
- Free measure survey at your Welwyn Garden City property
- Door-by-door schedule and fixed price
- Installation and handover pack
Common questions in Hertfordshire
What does a Welwyn Garden City quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Do you cover Welwyn Garden City?
Yes. We survey, supply and fit FD60 fire doors throughout Welwyn Garden City and the rest of Hertfordshire, including AL8 and nearby Hatfield.
Can you fit just one door in Welwyn Garden City?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Hertfordshire.
How thick is an FD60 door?
Typically 54mm for timber doorsets. Steel FD60 doors vary by manufacturer.
FD60 Fire Doorsets near Welwyn Garden City
- Hatfield (2 miles)
- Hertford (6 miles)
- St Albans (6 miles)
- Harpenden (6 miles)
- Stevenage (7 miles)
- Potters Bar (7 miles)
Other fire doors in Welwyn Garden City
- Glazed Fire Doors in Welwyn Garden City
- Fire Door Ironmongery & Closers in Welwyn Garden City
- Fire Door Supply & Fit in Welwyn Garden City
- FD30S Smoke Control Doorsets in Welwyn Garden City
- Fire Door Replacement in Welwyn Garden City
- HMO Fire Doors in Welwyn Garden City
- Fire-Rated Screens & Fanlights in Welwyn Garden City
- School & Healthcare Fire Doors in Welwyn Garden City
- FD60 Fire Doorsets across Hertfordshire
- All fire doors in Welwyn Garden City