Our Stevenage supply and fit service
If your fire risk assessment in Stevenage has flagged doors to replace, we can schedule, quote and fit FD60 doorsets for compartment walls, cores and plant rooms to match its recommendations. Surveys in SG1 are free and quotes are fixed and itemised.
Stevenage is about 19 miles from Watford. Wherever your building is in SG1, we arrange survey and fitting dates around access and occupancy.
What the law says in Stevenage
In Stevenage, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.
What do FD60 fire doors cost in Stevenage?
Budget around £1,050 to £1,650 per single doorset for FD60 fire doors supplied and fitted in Stevenage, excluding VAT. We price each opening separately so nothing is hidden in a lump sum.
We show each door's price separately, so if budget is tight you can phase the work and start with the doors your fire risk assessment prioritises.
Where FD60 fire doors are used in Stevenage
Typical uses for FD60 fire doors in Stevenage include stair cores in taller blocks and higher-risk stores.
Hertfordshire's new towns — Stevenage, Hatfield, Welwyn Garden City — sit alongside commuter towns with office-to-residential conversions.
- Stair cores in taller blocks
- Higher-risk stores
- Plant and boiler rooms
- Compartment walls
Doorset specification
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
From enquiry to handover
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Questions about FD60 fire doors in Stevenage
Can you fit just one door in Stevenage?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Hertfordshire.
Do you cover Stevenage?
Yes. We survey, supply and fit FD60 fire doors throughout Stevenage and the rest of Hertfordshire, including SG1 and nearby Hitchin.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Stevenage.
Can I use an FD60 door where FD30 is required?
Yes — a higher rating meets a lower requirement — but it is heavier and dearer, so we only recommend it where the location calls for it or you want a margin.
Also covering towns near Stevenage
- Hitchin (5 miles)
- Letchworth Garden City (6 miles)
- Welwyn Garden City (7 miles)
- Harpenden (9 miles)
- Hertford (9 miles)
- Luton (9 miles)
Also available in Stevenage
- Fire Exit Doors in Stevenage
- Communal & Corridor Fire Doors in Stevenage
- FD30 Fire Doorsets in Stevenage
- Stairwell & Escape Route Doors in Stevenage
- Steel Fire Doors in Stevenage
- Commercial & Office Fire Doors in Stevenage
- Fire Door Supply & Fit in Stevenage
- Fire-Rated Screens & Fanlights in Stevenage
- FD60 Fire Doorsets across Hertfordshire
- All fire doors in Stevenage