Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD60E60 / EI6054mm leaf

FD60 Fire Doorsets in West Midlands

We supply and fit FD60 fire doors throughout West Midlands, including Birmingham, Coventry and Wolverhampton, as complete certified doorsets with a free survey and a fixed, itemised quote.

From £1,050 per single doorset in West Midlands, supplied & fitted, ex VAT

Oak-veneered fire doorset pair with vision panel beside a concrete stair

FD60 Fire Doorsets for West Midlands buildings

Throughout West Midlands, including Birmingham, Coventry and Wolverhampton, we survey, quote and fit FD60 doorsets for compartment walls, cores and plant rooms as complete certified doorsets, with the manufacturer's certificate reference on every quote.

What the law says in West Midlands

Because West Midlands is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.

Guide prices in West Midlands

Guide prices for FD60 fire doors in West Midlands run from about £1,050 to £1,650 per single doorset, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.

If your fire risk assessment lists specific doors, send it with your enquiry and we'll price exactly those openings.

Where FD60 fire doors are needed

Birmingham has one of the UK's largest collections of residential tower blocks and city-centre apartments, with the Black Country towns adding industry, schools and HMOs.

  • Compartment walls
  • Stair cores in taller blocks
  • Plant and boiler rooms
  • Higher-risk stores

Doorset specification

Fire resistance60 minutes integrity (FD60 / E60); EI60 where specified
Typical leaf54mm timber or steel
Smoke controlFD60S available with tested smoke seals
Typical useCompartment walls, firefighting shafts, plant rooms
HingesUsually four hinges on timber leaves, per test evidence
Elevation drawing of fd60 fire doorsets

See the full specification and options for FD60 Fire Doorsets

What happens next

  1. Request a quote online or call
  2. Survey: sizes, ratings, hardware and condition
  3. Quote with each doorset's certification
  4. Phased fitting and handover records

Your questions answered

Do you remove the old doors?

Yes. Removal and disposal of the old door and frame is included when we replace a doorset.

Is the survey free?

Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.

Can you work around tenants or staff?

Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.

Can I use an FD60 door where FD30 is required?

Yes — a higher rating meets a lower requirement — but it is heavier and dearer, so we only recommend it where the location calls for it or you want a margin.

Towns in West Midlands we cover for FD60 fire doors

FD60 Fire Doorsets in neighbouring areas

Other fire doors in West Midlands

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.