FD60 Fire Doorsets for Sutton Coldfield buildings
Looking for FD60 fire doors in Sutton Coldfield? Our supply and fit service covers B75 and the surrounding area, including Washwood Heath and Aldridge. We quote complete doorsets — leaf, frame, seals, hinges and closer — because that is what the fire certification actually covers.
Whether your building is in central Sutton Coldfield or on its edges towards Washwood Heath, survey and fitting dates are arranged around your access needs, with occupied buildings worked in planned phases.
Which rules apply in Sutton Coldfield?
Fire doors in Sutton Coldfield sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
Guide prices in Sutton Coldfield
Budget around £1,050 to £1,650 per single doorset for FD60 fire doors supplied and fitted in Sutton Coldfield, excluding VAT. We price each opening separately so nothing is hidden in a lump sum.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Where FD60 fire doors are needed
Typical uses for FD60 fire doors in Sutton Coldfield include compartment walls and plant and boiler rooms.
Birmingham has one of the UK's largest collections of residential tower blocks and city-centre apartments, with the Black Country towns adding industry, schools and HMOs.
- Compartment walls
- Plant and boiler rooms
- Stair cores in taller blocks
- Higher-risk stores
What you get with each doorset
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
From enquiry to handover
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Common questions in West Midlands
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Sutton Coldfield.
Which rules do FD60 fire doors in Sutton Coldfield need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Can you work around tenants or staff in Sutton Coldfield?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Can I use an FD60 door where FD30 is required?
Yes — a higher rating meets a lower requirement — but it is heavier and dearer, so we only recommend it where the location calls for it or you want a margin.
Neighbouring areas
- Washwood Heath (4 miles)
- Aldridge (5 miles)
- Aston (6 miles)
- Birmingham (7 miles)
- Tamworth (7 miles)
- Walsall (7 miles)
Other fire doors in Sutton Coldfield
- Flat Entrance Fire Doors in Sutton Coldfield
- FD30 Fire Doorsets in Sutton Coldfield
- Commercial & Office Fire Doors in Sutton Coldfield
- Glazed Fire Doors in Sutton Coldfield
- Security Fire Doors in Sutton Coldfield
- Fire-Rated Screens & Fanlights in Sutton Coldfield
- Fire Exit Doors in Sutton Coldfield
- FD90 & FD120 Doorsets in Sutton Coldfield
- FD60 Fire Doorsets across West Midlands
- All fire doors in Sutton Coldfield