Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD60E60 / EI6054mm leaf

FD60 Fire Doorsets in Birmingham

We supply and fit FD60 fire doors in Birmingham (B3) as complete certified doorsets — surveyed free, quoted door by door with each manufacturer's certificate reference, and fitted to the manufacturer's instructions.

From £1,050 per single doorset in Birmingham, supplied & fitted, ex VAT

Oak-veneered fire doorset pair with vision panel beside a concrete stair

Our Birmingham supply and fit service

For landlords, managing agents, businesses and homeowners in Birmingham, we provide FD60 doorsets for compartment walls, cores and plant rooms with one fixed quote. A free survey comes first, then a door-by-door schedule, then installation to the manufacturer's instructions and a handover pack for your records.

Surveys in Birmingham are booked around your access needs, and we cover the wider West Midlands area too.

What the law says in Birmingham

In Birmingham, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.

What do FD60 fire doors cost in Birmingham?

Budget around £1,050 to £1,650 per single doorset for FD60 fire doors supplied and fitted in Birmingham, excluding VAT. We price each opening separately so nothing is hidden in a lump sum.

Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.

Where FD60 fire doors are used in Birmingham

Typical uses for FD60 fire doors in Birmingham include higher-risk stores and stair cores in taller blocks.

Birmingham has one of the UK's largest collections of residential tower blocks and city-centre apartments, with the Black Country towns adding industry, schools and HMOs.

  • Higher-risk stores
  • Stair cores in taller blocks
  • Plant and boiler rooms
  • Compartment walls

What's in the doorset

Fire resistance60 minutes integrity (FD60 / E60); EI60 where specified
Typical leaf54mm timber or steel
Smoke controlFD60S available with tested smoke seals
Typical useCompartment walls, firefighting shafts, plant rooms
HingesUsually four hinges on timber leaves, per test evidence
Elevation drawing of fd60 fire doorsets

See the full specification and options for FD60 Fire Doorsets

What happens next

  1. Share your FRA or inspection findings
  2. We confirm every door on site
  3. Fixed quote, certified doorsets only
  4. Fitted to the manufacturer's instructions, with photos

Common questions in West Midlands

Can you work around tenants or staff in Birmingham?

Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.

What does a Birmingham quote include?

Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.

Will I get certificates for the doors fitted in Birmingham?

Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.

Is there an FD60S?

Yes. FD60S doorsets have tested smoke seals as well as 60 minutes of fire resistance.

Nearby towns we cover

Other products in Birmingham

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.