Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD60E60 / EI6054mm leaf

FD60 Fire Doorsets in Staffordshire

We supply and fit FD60 fire doors throughout Staffordshire, including Stoke-on-Trent, Newcastle-under-Lyme and Burton upon Trent, as complete certified doorsets with a free survey and a fixed, itemised quote.

From £1,050 per single doorset in Staffordshire, supplied & fitted, ex VAT

Oak-veneered fire doorset pair with vision panel beside a concrete stair

Certified FD60 fire doors for Staffordshire

Our Staffordshire service covers FD60 fire doors for flats, HMOs, workplaces, schools and homes, including Stoke-on-Trent, Newcastle-under-Lyme and Burton upon Trent.

What the law says in Staffordshire

New and replacement fire doors in Staffordshire are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.

Cost of FD60 fire doors in Staffordshire

Expect roughly £1,050–£1,650 per single doorset for FD60 fire doors, fitted, ex VAT. Your Staffordshire quote is fixed after survey and itemised door by door.

Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.

Where FD60 fire doors are used in Staffordshire

Staffordshire combines the Potteries' industrial buildings with Stafford, Burton and Tamworth's logistics, schools and town centres.

  • Compartment walls
  • Stair cores in taller blocks
  • Plant and boiler rooms
  • Higher-risk stores

FD60 Fire Doorsets: key specification

Fire resistance60 minutes integrity (FD60 / E60); EI60 where specified
Typical leaf54mm timber or steel
Smoke controlFD60S available with tested smoke seals
Typical useCompartment walls, firefighting shafts, plant rooms
HingesUsually four hinges on timber leaves, per test evidence
Elevation drawing of fd60 fire doorsets

See the full specification and options for FD60 Fire Doorsets

How it works in Staffordshire

  1. Send your postcode, door count and any fire risk assessment notes
  2. We survey and measure each opening for free
  3. You get a fixed, itemised quote with certificate references
  4. We fit, test operation and hand over the paperwork

Questions about FD60 fire doors in Staffordshire

Can you work around tenants or staff?

Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.

Is the survey free?

Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.

Do you remove the old doors?

Yes. Removal and disposal of the old door and frame is included when we replace a doorset.

Do FD60 doors need different closers?

Often a stronger closer, sized to the heavier leaf, still keeping opening forces within Approved Document M limits where accessibility applies.

Towns in Staffordshire we cover for FD60 fire doors

FD60 Fire Doorsets in neighbouring areas

Other fire doors in Staffordshire

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.