Getting FD60 fire doors fitted in Coventry
Fire Rated Doors supplies and fits FD60 fire doors in Coventry, West Midlands. Whether it's a single replacement or every door in a block, we start by surveying the openings and end with a handover pack listing each doorset and its certificate reference.
We cover CV1 and the surrounding area, including Kenilworth. Tell us your postcode and preferred dates and we'll confirm a survey slot.
Regulations for FD60 fire doors in West Midlands
Because Coventry is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
FD60 fire doors prices in Coventry
Guide prices for FD60 fire doors in Coventry run from about £1,050 to £1,650 per single doorset, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Typical uses in Coventry
Higher-risk stores and compartment walls are among the most common settings for FD60 fire doors, in Coventry as elsewhere.
Birmingham has one of the UK's largest collections of residential tower blocks and city-centre apartments, with the Black Country towns adding industry, schools and HMOs.
- Higher-risk stores
- Compartment walls
- Plant and boiler rooms
- Stair cores in taller blocks
What you get with each doorset
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
From enquiry to handover
- Request a quote online or call
- Survey: sizes, ratings, hardware and condition
- Quote with each doorset's certification
- Phased fitting and handover records
FD60 fire doors in Coventry: questions
Is the survey in Coventry free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Will I get certificates for the doors fitted in Coventry?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Do you cover Coventry?
Yes. We survey, supply and fit FD60 fire doors throughout Coventry and the rest of West Midlands, including CV1 and nearby Kenilworth.
Do FD60 doors need different closers?
Often a stronger closer, sized to the heavier leaf, still keeping opening forces within Approved Document M limits where accessibility applies.
FD60 Fire Doorsets near Coventry
- Kenilworth (5 miles)
- Bedworth (6 miles)
- Nuneaton (8 miles)
- Leamington Spa (9 miles)
- Warwick (9 miles)
- Rugby (11 miles)
Other products in Coventry
- Flat Entrance Fire Doors in Coventry
- Commercial & Office Fire Doors in Coventry
- Communal & Corridor Fire Doors in Coventry
- FD90 & FD120 Doorsets in Coventry
- Fire Door Ironmongery & Closers in Coventry
- Fire Door Replacement in Coventry
- Fire-Rated Screens & Fanlights in Coventry
- Fire Exit Doors in Coventry
- FD60 Fire Doorsets across West Midlands
- All fire doors in Coventry