Certified FD60 fire doors for Shropshire
Across Shropshire we handle FD60 fire doors for single doors and whole-building programmes alike — survey, fixed quote, certified doorsets and careful installation.
Regulations for FD60 fire doors in Shropshire
New and replacement fire doors in Shropshire are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
FD60 fire doors prices in Shropshire
Guide prices for FD60 fire doors in Shropshire run from about £1,050 to £1,650 per single doorset, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.
Buildings that need FD60 fire doors
Shropshire runs from Telford's modern industrial estates to Shrewsbury's historic centre and rural care and hospitality buildings.
- Compartment walls
- Stair cores in taller blocks
- Plant and boiler rooms
- Higher-risk stores
Doorset specification
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
What happens next
- Request a quote online or call
- Survey: sizes, ratings, hardware and condition
- Quote with each doorset's certification
- Phased fitting and handover records
Your questions answered
Can you fit just one door?
Yes — from a single door to a full building.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset.
Will I get certificates for the doors fitted?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Can I use an FD60 door where FD30 is required?
Yes — a higher rating meets a lower requirement — but it is heavier and dearer, so we only recommend it where the location calls for it or you want a margin.
Towns in Shropshire we cover for FD60 fire doors
FD60 Fire Doorsets in neighbouring areas
Other fire doors in Shropshire
- FD30 Fire Doorsets in Shropshire
- FD30S Smoke Control Doorsets in Shropshire
- FD90 & FD120 Doorsets in Shropshire
- Flat Entrance Fire Doors in Shropshire
- Communal & Corridor Fire Doors in Shropshire
- Stairwell & Escape Route Doors in Shropshire
- HMO Fire Doors in Shropshire
- Fire Doors for Homes in Shropshire
- Riser & Service Cupboard Doors in Shropshire
- Commercial & Office Fire Doors in Shropshire
- School & Healthcare Fire Doors in Shropshire
- Timber Fire Doorsets in Shropshire
- Composite Fire Doors in Shropshire
- Steel Fire Doors in Shropshire
- Glazed Fire Doors in Shropshire
- Double & Leaf-and-a-Half Fire Doors in Shropshire
- Fire-Rated Screens & Fanlights in Shropshire
- Acoustic Fire Doors in Shropshire
- Security Fire Doors in Shropshire
- Fire Exit Doors in Shropshire
- Fire Door Ironmongery & Closers in Shropshire
- Fire Door Replacement in Shropshire
- Fire Door Supply & Fit in Shropshire
- All fire doors in Shropshire