FD90 and FD120 fire doors in Tyne and Wear: how we work
Across Tyne and Wear we handle FD90 and FD120 fire doors for single doors and whole-building programmes alike — survey, fixed quote, certified doorsets and careful installation.
What the law says in Tyne and Wear
Fire doors in Tyne and Wear sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
Cost of FD90 and FD120 fire doors in Tyne and Wear
Our guide price for FD90 and FD120 fire doors in Tyne and Wear is £1,900 to £3,800 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
If your fire risk assessment lists specific doors, send it with your enquiry and we'll price exactly those openings.
Where FD90 and FD120 fire doors are needed
Newcastle and Sunderland combine city-centre apartments and student housing with a large stock of post-war council blocks and terraces.
- Transformer and switch rooms
- Generator rooms
- High fire-load stores
- Separating walls with long ratings
FD90 & FD120 Doorsets: key specification
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
How it works in Tyne and Wear
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Questions about FD90 and FD120 fire doors in Tyne and Wear
How quickly can you survey in Tyne and Wear?
We arrange surveys around your access needs and, where possible, combine visits with other work in Tyne and Wear. Tell us your preferred dates when you enquire.
Can you fit just one door?
Yes — from a single door to a full building.
Is the survey free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Do these doors need panic hardware?
Only where they are on an escape route and the fire strategy calls for it. Panic hardware must be tested with the doorset.
Towns in Tyne and Wear we cover for FD90 and FD120 fire doors
- Felling
- Gateshead
- Gosforth
- Hebburn
- Jarrow
- Newburn
- Newcastle upon Tyne
- North Shields
- South Shields
- Sunderland
- Tynemouth
- Wallsend
- Washington
- Whitley Bay
FD90 & FD120 Doorsets in neighbouring areas
Other fire doors in Tyne and Wear
- FD30 Fire Doorsets in Tyne and Wear
- FD30S Smoke Control Doorsets in Tyne and Wear
- FD60 Fire Doorsets in Tyne and Wear
- Flat Entrance Fire Doors in Tyne and Wear
- Communal & Corridor Fire Doors in Tyne and Wear
- Stairwell & Escape Route Doors in Tyne and Wear
- HMO Fire Doors in Tyne and Wear
- Fire Doors for Homes in Tyne and Wear
- Riser & Service Cupboard Doors in Tyne and Wear
- Commercial & Office Fire Doors in Tyne and Wear
- School & Healthcare Fire Doors in Tyne and Wear
- Timber Fire Doorsets in Tyne and Wear
- Composite Fire Doors in Tyne and Wear
- Steel Fire Doors in Tyne and Wear
- Glazed Fire Doors in Tyne and Wear
- Double & Leaf-and-a-Half Fire Doors in Tyne and Wear
- Fire-Rated Screens & Fanlights in Tyne and Wear
- Acoustic Fire Doors in Tyne and Wear
- Security Fire Doors in Tyne and Wear
- Fire Exit Doors in Tyne and Wear
- Fire Door Ironmongery & Closers in Tyne and Wear
- Fire Door Replacement in Tyne and Wear
- Fire Door Supply & Fit in Tyne and Wear
- All fire doors in Tyne and Wear