FD90 and FD120 fire doors in Wallsend: how we work
We fit FD90 and FD120 steel doorsets for plant and high-risk rooms in Wallsend and the rest of Tyne and Wear. The process is simple: we survey and measure each opening, propose a certified doorset for it, and give you a fixed price. Fitting is booked once the doorsets are made, usually with no door left out of action overnight.
Where possible we combine Wallsend surveys with other visits in Tyne and Wear, such as Hebburn and Jarrow, which helps keep survey dates flexible.
Regulations for FD90 and FD120 fire doors in Tyne and Wear
Fire doors in Wallsend sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
Cost of FD90 and FD120 fire doors in Tyne and Wear
Our guide price for FD90 and FD120 fire doors in Wallsend is £1,900 to £3,800 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
We show each door's price separately, so if budget is tight you can phase the work and start with the doors your fire risk assessment prioritises.
Typical uses in Wallsend
Typical uses for FD90 and FD120 fire doors in Wallsend include generator rooms and high fire-load stores.
Newcastle and Sunderland combine city-centre apartments and student housing with a large stock of post-war council blocks and terraces.
- Generator rooms
- High fire-load stores
- Transformer and switch rooms
- Separating walls with long ratings
FD90 & FD120 Doorsets: key specification
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
Four steps to compliant doors
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Common questions in Tyne and Wear
Can you work around tenants or staff in Wallsend?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Will I get certificates for the doors fitted in Wallsend?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Can you fit just one door in Wallsend?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Tyne and Wear.
How long do they take to make?
Usually several weeks as they are made to order. We confirm lead time on your quote.
Nearby towns we cover
- Hebburn (1 mile)
- Jarrow (2 miles)
- Felling (3 miles)
- Gosforth (3 miles)
- Gateshead (3 miles)
- Newcastle upon Tyne (3 miles)
Other products in Wallsend
- HMO Fire Doors in Wallsend
- Timber Fire Doorsets in Wallsend
- Fire-Rated Screens & Fanlights in Wallsend
- Flat Entrance Fire Doors in Wallsend
- Stairwell & Escape Route Doors in Wallsend
- Security Fire Doors in Wallsend
- Commercial & Office Fire Doors in Wallsend
- Fire Door Ironmongery & Closers in Wallsend
- FD90 & FD120 Doorsets across Tyne and Wear
- All fire doors in Wallsend