Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD30SPairsHold-open

Communal & Corridor Fire Doors in Tyne and Wear

We supply and fit communal fire doors throughout Tyne and Wear, including Newcastle upon Tyne, Sunderland and South Shields, as complete certified doorsets with a free survey and a fixed, itemised quote.

From £1,600 per pair in Tyne and Wear, supplied & fitted, ex VAT

Pair of white timber cross-corridor fire doors with vision panels and hold-open devices

Communal & Corridor Fire Doors for Tyne and Wear buildings

Across Tyne and Wear we handle communal fire doors for single doors and whole-building programmes alike — survey, fixed quote, certified doorsets and careful installation.

What the law says in Tyne and Wear

Because Tyne and Wear is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.

Communal fire doors prices in Tyne and Wear

Expect roughly £1,600–£3,200 per pair for communal fire doors, fitted, ex VAT. Your Tyne and Wear quote is fixed after survey and itemised door by door.

Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.

Buildings that need communal fire doors

Newcastle and Sunderland combine city-centre apartments and student housing with a large stock of post-war council blocks and terraces.

  • Blocks of flats
  • Sheltered and supported housing
  • Student accommodation
  • Hotels

What you get with each doorset

RatingFD30S typical; FD60S in some lobbies
ConfigurationSingles, pairs and leaf-and-a-half
GlazingVision panels sized to the doorset's evidence
Hold-openAlarm-linked magnetic hold-open or free-swing closers (BS EN 1155)
AccessibilityOpening forces and vision panels to accessibility guidance (Approved Document M in England)
Elevation drawing of communal & corridor fire doors

See the full specification and options for Communal & Corridor Fire Doors

How it works in Tyne and Wear

  1. Send your postcode, door count and any fire risk assessment notes
  2. We survey and measure each opening for free
  3. You get a fixed, itemised quote with certificate references
  4. We fit, test operation and hand over the paperwork

Your questions answered

Can you fit just one door?

Yes — from a single door to a full building.

Will I get certificates for the doors fitted?

Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.

Which rules apply in Tyne and Wear?

Doors are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.

How often should communal fire doors be checked?

In England, regulation 10 requires at least three-monthly checks in residential buildings with a storey above 11 metres. Good practice is regular checks in all buildings.

Towns in Tyne and Wear we cover for communal fire doors

Communal & Corridor Fire Doors in neighbouring areas

Other fire doors in Tyne and Wear

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.