FD90 & FD120 Doorsets for Washington buildings
Getting FD90 and FD120 fire doors right in Washington means choosing a certified doorset for each opening and fitting it exactly as tested. That's the whole service: survey, schedule, certified doorset, careful installation and the paperwork to prove it.
We cover NE38 and the surrounding area, including Chester-le-Street. Tell us your postcode and preferred dates and we'll confirm a survey slot.
Which rules apply in Washington?
Fire doors in Washington sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
Cost of FD90 and FD120 fire doors in Tyne and Wear
Guide prices for FD90 and FD120 fire doors in Washington run from about £1,900 to £3,800 per single doorset, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
If your fire risk assessment lists specific doors, send it with your enquiry and we'll price exactly those openings.
Typical uses in Washington
Wherever they are in Washington, FD90 and FD120 fire doors are most often specified for generator rooms and high fire-load stores.
Newcastle and Sunderland combine city-centre apartments and student housing with a large stock of post-war council blocks and terraces.
- Generator rooms
- High fire-load stores
- Transformer and switch rooms
- Separating walls with long ratings
Doorset specification
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
Four steps to compliant doors
- Tell us about the doors — photos help
- Free measure survey at your Washington property
- Door-by-door schedule and fixed price
- Installation and handover pack
FD90 and FD120 fire doors in Washington: questions
Do you cover Washington?
Yes. We survey, supply and fit FD90 and FD120 fire doors throughout Washington and the rest of Tyne and Wear, including NE38 and nearby Chester-le-Street.
Can you work around tenants or staff in Washington?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Will I get certificates for the doors fitted in Washington?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
How long do they take to make?
Usually several weeks as they are made to order. We confirm lead time on your quote.
Neighbouring areas
- Chester-le-Street (4 miles)
- Felling (4 miles)
- Houghton-le-Spring (4 miles)
- Hebburn (5 miles)
- Sunderland (6 miles)
- Gateshead (6 miles)
More doorsets for Washington
- FD60 Fire Doorsets in Washington
- Fire Door Replacement in Washington
- Stairwell & Escape Route Doors in Washington
- Glazed Fire Doors in Washington
- FD30S Smoke Control Doorsets in Washington
- Steel Fire Doors in Washington
- HMO Fire Doors in Washington
- Communal & Corridor Fire Doors in Washington
- FD90 & FD120 Doorsets across Tyne and Wear
- All fire doors in Washington